What tension mechanism does the fiber laser cutting machine have

Tightening mechanism and fiber laser cutting machine, supporting plate and tensioning components, the supporting plate is unchanged at the end of the main frame of the fiber laser cutting machine apart from the interchange table, and the tensioning components are not configured on the supporting plate; Among them, the tension assembly twists the cylinder and the tension block, and the torsion cylinder is unchanged on the support plate. The tension block and the torsion axis of the torsion cylinder continue, and the torsion cylinder can drive the tension block to twist and extend, and the tension block Located on the side of the support board close to the interchange table. The layout of the tensioning mechanism of the fiber laser cutting machine is simple and reasonable, easy to manufacture, stable in function, low precision requirements, long application life, and low cost. It can guarantee that the cutting table of the fiber laser cutting machine can consolidate its part-time position in cutting. Thereby improving the accuracy of the cutting process of the fiber laser cutting machine, and improving the overall function and product quality of the fiber laser cutting machine.

Electric control cabinet for fiber laser cutting machine and fiber laser cutting machine, with a constant frame in the inner space, and laser generators and electrical components placed in the inner space And the condenser, the laser generator is used to connect with the cold storage water tank in the cold storage system, and the cold storage water tank is used for cooling; the condenser is used to connect with the cold storage water tank in the cold storage system and cool the inner space. Electric control cabinet for fiber laser cutting machine, non-frame, laser generator, electrical components and condenser. The condenser is used to connect with the cold storage water tank in the cold storage system and cool the inside space. In this way, the layout of the electric control cabinet is more In order to be compact, the space utilization rate is higher, and the circulating cooling water circuit can be used to reduce the temperature of the electric control cabinet, without the need to increase the cabinet air conditioner, thus reducing the construction cost.

The carbon dioxide fiber laser cutting machine reduces the emission of soot and exhaust gas, improves the atmosphere quality, and improves environmental protection; it includes the placement board, part-time table and mobile assembly, and the top configuration of the placement board There is a placement rack, the part-time table is placed on the placement rack, the part-time table is equipped with leaks, the part-time table is equipped with constant assembly, the mobile assembly is placed on the placement rack, and the mobile assembly is located above the part-time table, and the mobile assembly is configured There is a laser cutting head; there is also a disposal box, a liquid pump and a fifth connecting pipe. The bottom end of the disposal box is continuous with the left side of the top of the placement plate. The inside of the disposal box is equipped with an inner cavity, and the top of the disposal box is equipped with an exhaust port. Moreover, the exhaust port is similar to the inner cavity, the top of the exhaust port is connected with a continuous bucket, the top output end of the continuous bucket is connected with a first continuous through pipe, and the inside of the first continuous through pipe is equipped with an air pump. /