Laser cutting techniques for different metal materials
The use of laser has become more and more mature after decades of development, which has brought tremendous changes to the global manufacturing industry, especially the sheet metal processing industry. Fiber laser cutting machines have entered our lives from the industrial field, and more and more materials are suitable for cutting. However, when using a fiber laser cutting machine to cut different materials, the cutting method used should also be appropriately adjusted to achieve the ideal cutting quality.
First, stainless steel cutting
Cutting stainless steel metal sheets generally uses nitrogen gas to prevent oxidation. There is no burr edge, and it can be welded directly without post-processing. According to the characteristics of stainless steel, it can accelerate the fluidity of the liquid and make the cutting efficiency higher and faster. However, the effect of cutting with oxygen may be worse than that of nitrogen, causing the end surface to be black and not smooth.
Second, carbon steel cutting
When laser cutting carbon steel, generally use oxygen to get better results. While the oxygen reaction heat is used to increase the cutting efficiency in a large format, the oxide film produced will also increase the beam spectrum absorption factor of the reflective material. When using oxygen processing, there is a problem that the edges may be slightly oxidized. If users have strict requirements, they can use nitrogen for high-pressure cutting. Of course, they can also paint the surface of the workpiece to achieve better cutting results.
3. Aluminum cutting
Aluminum is a highly reflective material in metal materials, which has high reflectivity and thermal conductivity. In recent years, laser cutting machines from many manufacturers have installed 'anti-reflection devices' to adapt to aluminum cutting. Laser cutting opportunities that do not have 'anti-reflection devices' have damaged their optical components. At the same time, depending on the power of the equipment, the thickness of the cut aluminum material is also different. Generally speaking, the thickness of stainless steel and carbon steel cut by the same equipment is thicker than that of high-reflection materials such as aluminum. Aluminum is also more suitable for cutting with nitrogen, and the cutting effect is good and the end surface is smoother.
Four. Copper and brass cutting
Like aluminum, copper and brass are highly reflective materials and require lasers with 'anti-reflection devices' The cutting machine performs cutting. Brass with a thickness of 1mm or less can be cut with nitrogen; copper with a thickness of 2mm or less can be cut.
