What equipment is the fiber laser cutting machine composed of
The active high and low material assembly of the fiber laser cutting machine is composed of a fiber laser cutting machine, a single-layer storage, a product rack, and an active high and low material assembly. Aulo series products are suitable for Mercedes-Benz laser upswing and lightning series fiber laser cutting machine equipment.
Single-layer storage: used to store plates, controlled by the host, to provide high-quality and automated management and transportation for the manufacturing process.
Product material rack: The cut products are densely arranged on the product material rack by the fork lifter, which is convenient for later sorting.
Active high and low material assembly: It has the dual functions of active feeding and unloading. The frame layout is compact and consolidated, featuring positioning, fast and naive operation. The vacuum sucker is used to absorb the unprocessed board, which has the functions of board inspection and separate discrimination.
Fiber laser cutting machine working station: automatically complete the whole process from loading, cutting to unloading by the pre-set French.
Active high and low material assembly of fiber laser cutting machine
The working process of fiber laser cutting machine:
n Absorbing material: The vacuum suction cup tooling moves the absorption material downward , And then move up to the designated interval, then the fork lifter moves up to the material layer, and the fork teeth move inward to below the sucked material. At this time, the vacuum suction cup tool loosens the material, and the material falls on the tines, and then The fork tines move outwards, and then move down to the laser interchange table to send the material to the laser interchange table;
n Fork lifter forks to take products: the laser interchange table will cut The good products are moved out of the work area, and then the material on the second-level interchange work table is moved to the laser work area for cutting. At this time, the fork lifter is on standby on the outside of the laser work table, as the product is moved to the designated position , The fork teeth move the fork inward to pick up the product, and then move to the product layer, use the stop teeth to arrange the product on the product layer;
n absorb the material again, and arrange the material on the empty exchange table Top: After the fork lifter arranges the products on the product layer, the material is re-absorbed according to the French method of process 1, and arranged on the empty laser interchange table, and the rear fork lifter stands by outside the interchange table, in sequence Reincarnation matter.
The fiber laser cutting machine has been widely used in contemporary industries due to its wide cutting limitations, high cutting speed, narrow kerf, good cutting quality, small heat affected zone, and large additive flexibility. , Fiber laser cutting machine technology has also become one of the mature technologies in laser processing technology. Compared with other lights, the laser has the following characteristics: high brightness, high deflection, high monochromaticity, and high correlation. It is precisely because the fiber optic fiber laser cutting machine has these four characteristics, it has been widely used, and brought the following rare characteristics to laser processing that were not available in ancient processing:
(1) Because there is no Touch processing, and the energy and movement rate of the laser beam are adjustable, so it can complete a variety of processing.
(2) It can be used to process a variety of metals and non-metals, especially materials with high hardness, high brittleness and high melting point.
(3) There is no 'tool' wear during laser processing, and no 'cutting force' is used on the workpiece.
(4) The heat-affected zone of the workpiece processed by laser is small, the thermal deformation of the workpiece is small, and the subsequent processing volume is small.
(5) The laser can undergo various processing of the workpiece in the closed container through the transparent medium.
(6) The laser is easy to guide. It is easy to cooperate with the CNC system and process complicated workpieces. Therefore, the fiber laser cutting machine is an extremely naive cutting processing technique.
(7) Laser processing and manufacturing have high obedience, processing quality is consolidated and reliable, and economic and social benefits are prominent