What are the functions of fiber laser cutting machine
This new version of this applicable publication discloses a new type of fiber laser cutting machine, which includes an outer shell. The four corners of the side wall of the outer shell do not have a mounting block. The bottom end of the mounting block is provided with a rib hole. Rib holes experience ribs and continue to have rib bars, the bottom end of the rib rod does not have a sprocket, the vertical center line of the sprocket coincides with the vertical center line of the rib rod, and the bottom of the sprocket is equipped with a foot, so A regulating sleeve is sleeved on the outside of the gear plate; this is suitable for the placement block of the new type of experience plan, which is convenient for the placement of the replacement foot. The rib rod can be screwed with the rib hole and rib to mobilize the foot For high and low adjustment, the teeth on the sidewall of the tooth disc can be engaged with the block on the adjustment sleeve, and the adjustment sleeve can be locked unchanged. After the planned adjustment sleeve, the foot can be adjusted. At this time, no application object is needed, only the adjustment sleeve is required to roll, that is, the rib bar is mobilized to roll.
A fiber laser cutting machine, including a cutting box, the top side of the cutting box is provided with a laser cutting head, the top side of the cutting box is provided with a placement hole, and a wire mesh is arranged in the placement hole to cut There is a network box inside the box. The network box is compatible with the barbed wire. The two inner walls of the network box are fixed with a single invariant rod. The behavior of the invariant rod is sleeved with two sliding rods. A clean frame is installed on the top without change. The new-style layout of this application is simple, and the barbed wire is removed through the clean frame to move back and forth to ensure that the waste can pass through the barbed wire and fall into the network box smoothly. At the same time, it undergoes the strike of the hammer to make the larger waste stuck on the barbed wire. It can fall into the network box to ensure the smoothness of the barbed wire, keep the appearance of the barbed wire clean, avoid the impact of waste accumulation on cutting, ensure the quality of the product, and meet people's needs.