What are the equipment and precision of automatic fiber cutting machine manufacturers
Taiwan group of automatic fiber cutting manufacturers also meets the requirement of automatic fiber cutting for steel pipes of larger diameter. It is not only limited to seamless steel pipes within Φ406mm, but also expands its application range. The rollers of the CNC-type automatic fiber cutting and cutting machine are also limited by the length of the tube. In this way, the problem of cutting blind spots can be solved by increasing the axial movement device or extending the track length of the moving frame. The improvement of the rotatable tube end cutting machine Compared with the Jinfeng XMG CNC table group automatic fiber cutting and cutting machine, the rotatable tube end automatic cutting machine has greatly improved both the cutting capacity and the cutting quality, but in actual operation There is a phenomenon of low utilization of equipment. In order to solve this problem, the support function can be provided by adding corresponding rotating tires. This ensures that one cutting device corresponds to two supports, and does not affect each other during cutting, and can simultaneously cut different rods. Improve the utilization of equipment. As the overall offshore oil steel structure tends to be large-scale, higher requirements for construction quality and technology have been put forward, and the quality and technology of the automatic fiber cutting and cutting of the platform group need to be further improved. In the actual application of the above two devices, taking necessary measures to make phased improvements will inevitably produce huge economic benefits, and to a certain extent realize the purpose of reducing costs and increasing efficiency.
Taiwan group of automatic fiber cutting manufacturers have diagonal braces with different thicknesses. There are many nodes in local areas, and the welding seams are dense, and the welding requires single-sided welding and double-sided forming. The requirements are put forward for the precision and high-efficiency machining of the groove. It is difficult to process the groove of the steel pipe and the steel pipe at a certain angle in the space (that is, the automatic fiber cutting of the station group). The traditional manual processing method is not only inefficient, but also difficult to guarantee the quality of the product processing, which affects the subsequent workpieces. Welding quality and spatial geometry. The CNC table group automatic fiber cutting and cutting machine not only improves the work efficiency, but also ensures the quality of the table group automatic fiber cutting groove processing. Introduction of equipment and performance parameters The CNC automatic optical fiber cutting and cutting machine is composed of dynamic and force rotating cutting heads, control systems and mobile frames. By moving the frame, the running rail and the carriage rail are kept in balance, thereby increasing the cutting accuracy of the machine. The power rotating head drives the workpiece through the chuck. The rotating cutting head has a cutting nozzle and is equipped with an automatic ignition device for cutting pipes. It can move axially and radially. Through the control system to control the linkage of the above motion axes, the automatic fiber cutting of the steel pipe group is finally realized. It is mainly used for the programming and nesting of automatic fiber cutting pipe fittings of the group of stations, generating CNC cutting instructions, and driving the cutting machine to work. Its core is graphics processing, which is an application software based on AutoCAD2008 that uses the most intuitive graphics to solve nesting and programming problems. The union data processing and the database are reliable, more powerful, and more convenient to use. The system software adopts the combination of CAD drawing and library module input, thus ensuring the wide range of automatic fiber cutting structure processing of the group and the convenience of workpiece programming and nesting. The automatic fiber cutting and nesting programming system of Taiwan Group mainly includes three parts: AutoCAD drawing programming, pipe fitting module input programming, and nesting system.
This article is published by the original