What are the characteristics of precision fiber laser cutting machine

This is a tight-fitting fiber laser cutting machine with a new type of machine tool processing equipment technology platform. It includes a cutting machine housing. The front side wall of the cutting machine housing is equipped with a control port. The bottom behavior of the control port is There is a constant frame, one side of the constant frame is equipped with a supporting table, and one side of the supporting table is constant with the side wall of the cutting machine housing. This is suitable for the new type of universal wheel and supporting foot The joint venture between the two can complete the distinction between the universal wheel and the earth through the adjustment set discussion when the demand assembly remains unchanged, and improve the stability of the assembly. The joint venture between the rolling table and the propulsion handle can complete the propulsion handle. Retractable, prevent the push handle takes up a lot of space, which affects the application of assembly. After the joint operation between the transparent glass plate and the unchanging frame, it can not only seal the control port, but also arrange a small amount of material to be processed on the transparent glass plate. As a work station application.

A large-format, high-power, non-standard fiber laser cutting machine, including a floor, and 6 equipment floor mats are uniformly arranged on the floor base surface with screws. The one-wall screw of the separated floor has a slide rail mounting plate and a second slide rail mounting plate. The slide rail mounting plate is equipped with a floor mat. The wall screw is equipped with a slide rail, and the second slide rail mounting plate is equipped with a wall of the floor mat. The second slide rail is mounted on the screw, one end of the slide rail away from the slide rail mounting plate continues to slide with a slider, and the second slide rail away from the end of the second slide rail mounting plate continues to slide with a second slider, the slider and the second slide There is a continuous moving plate on the end screw of the block away from the floor. This is suitable for the new type of experience gripping claw to clamp the optical fiber, the laser cutter cuts the twisting optical fiber, after cutting one end, move the holder forward, and then move the index cutting position to the laser cutter.