What are the application scopes of the fiber laser cutting machine
The CNC fiber laser cutting machine is widely used in sheet metal processing, agricultural machinery production, auto parts production and other production enterprises with its characteristics of rapid cutting speed, small cutting cracks, and strong cutting stability. Based on this, the article uses the CNC fiber laser cutting machine as a research tool to briefly explain its application in production, including application characteristics, advantages, and obstructive disposal facilities.
Driven by the continuous development of industrial mechanization, automation, and intelligence, the examples, number, scope of application, and application requests of modernized machinery and equipment have continued to grow. Enhancing the research of modernized machinery and equipment and its application in production practice, in order to stimulate the development and application of innovation of machinery and equipment, and become the focus of related enterprises and employees. The CNC fiber laser cutting machine is widely used as a machine equipment in the contemporary production industry, enhancing its research and practical use. The following is the author's decomposition of the CNC fiber laser cutting machine and its application in production, which is intended to be insight.
For the basic decomposition of 'CNC fiber laser cutting machineAnd actual. It is necessary to have an inevitable decomposition of fiber laser cutting machine technology. Laser cutting technology (Lasercutting technology) is a cutting method based on the birth of laser, following the innovation of laser drilling technology. In the process of laser cutting, according to the principle of energy conversion, the laser is generated by the laser alignment assembly, and the laser beam is generated under the use of the focusing mirror, and the laser beam is focused on the cutting tool to complete the useful cluster of energy. The light energy is gradually converted into heat energy. The material to be cut is melted or vaporized. At the same time, with the help of the help gas, blow away the melted and vaporized metal to complete the material cutting mission. With the success and innovation of laser cutting technology, the application of laser cutting technology has become more and more prominent [1]. If the cutting accuracy is relatively high, the positioning accuracy can reach 0.05 mm; the slit is relatively small, and the appearance quality of the code word is higher. The width of the code word in a normal environment is 0.1. From the waveform diagram, the three-phase voltage output is T/3 The phase difference is related, and the three-phase line voltage can also be very close to the exchange power. In fact, the voltage output from the inverter circuit is not a standard sine wave, but a current that is similar to a sine wave after passing through the motor stator coil to drive the exchange motor. Usually the switching environment of the switch tube is that the conduction angle of each tube is 180°, and the angle of each other is 60°. Therefore, there are three switching tubes conducting at the moment when you are working, and the unblocking sequence is 1-6-3, 6-3- 2,3-2-5,2-5-4,5-4-1,4-1-6. At no time will any group of IGBT1-IGBT2, IGBT3-IGBT4 or IGBT5-IGBT6 be turned on at the same time, otherwise it will cause a short circuit of the power supply, which is not allowed.
After 3 months of electric locomotive innovation, the field application environment has changed all the original resistance speed control locomotives to frequency conversion speed control electric locomotives. The field application proved that the new frequency conversion speed regulation electric locomotive, the speed regulation is doubled and stable, and the stepless speed regulation is completed. At the same time, after the electric locomotive battery is filled with electricity, the application time of the electric locomotive has increased by 5 hours compared with before, which is the most energy-saving. And after half a year of application, the foundation of the accessories in the electric locomotive controller has not been destroyed, which greatly reduces the input of material costs.
The description of the fiber laser cutting machine and the advantages of the frequency conversion locomotive can be seen. It is not critical to save a lot of funds, and the application repair rate is low, the traction is high, and the safety and reliability are high. Features. The driver console is convenient for the driver to control and inquire about the safe state of the locomotive at any time. The entire locomotive operation is completely controlled by the computer. The driver's operation is doubled and simplified. Even if the driver violates the regulations, the on-board computer can diagnose itself. The refusal to implement the faulty order and the eradication of chaos ensured the safe and reliable operation of the locomotive. The various shortcomings of resistance-regulated locomotives have been dealt with to achieve high efficiency, energy saving, and reduce corporate payments, which has won good economic and social benefits for user units. Therefore, this technology has the most promising prospects for implementation.