Use skills of fiber laser cutting machine
Five-point use tips for fiber laser cutting machine. The dual focus laser cutting head is a vulnerable item on the laser cutting machine. Long-term use will cause damage to the laser cutting head. Check the straightness of the fiber laser cutting machine track and the verticality of the machine every six months, and if it is found to be abnormal, it will be maintained and debugged in time. If this is not done, the cutting effect may not be so good, the error will increase, and the cutting quality will be affected. This is the top priority and must be done. Use a vacuum cleaner to remove dust and dirt from the machine once a week, and all electrical cabinets should be closed to prevent dust. Check the steel belt of the fiber laser cutting machine frequently to ensure that it is tight. Otherwise, if there is a problem in operation, it may hurt people, or even cause death in serious cases. The steel belt looks like a small thing, but the problem is still a bit serious. The guide rails of the fiber laser cutting machine should be cleaned frequently to remove dust and other debris to ensure that the equipment is normal. The rack should be wiped frequently and lubricated to ensure lubrication without debris. The guide rails should be cleaned and lubricated frequently, and the motor should also be cleaned and lubricated frequently. The machine can move better and cut more accurately, and the quality of the cut products will be improved.
Brief description of fiber laser cutting machine products. As a new type of tool, laser cutting machine equipment is increasingly used in various industries, including laser cutting machines, laser engraving machines, laser marking machines, and lasers. Welding machine, etc. So how exactly is laser cutting used, and how to distinguish between good and bad laser cutting? Material melting, coupled with the high-pressure gas coaxial with the beam to directly remove the molten metal, so as to achieve the purpose of cutting, which shows that laser cutting is the same as the machine tool's machinery. There is a fundamental difference in processing. The amount is absorbed by the workpiece material, and the temperature of the workpiece rises sharply. After reaching the Tao point, the material begins to vaporize and form holes. With the high-pressure airflow, as the beam moves relative to the workpiece, the material finally forms a slit. The process parameters (cutting speed, laser power, gas pressure, etc.) and movement trajectory during slitting are controlled by the numerical control system, and the slag at the slit is blown away by a certain pressure of auxiliary gas.