u200bAutomatic fiber cutting machine manufacturers adjust system functions and manufacturing capabilities
The manufacturer of the automatic fiber cutting machine of the station group compares the homogeneous transformation matrix of the appropriate module selected from the module library with the target matrix of the processing task, so that the product of the homogeneous matrix of all the modules constituting the machine tool is equal to the target matrix : When selecting a module, for modules that do not exist in the module library, a new module needs to be designed and added to the module library. The main common machine faults are based on the processing tasks shown in Figure 2, and the appropriate modules are selected in the module library to form the reconfigurable CNC table group as shown in Figure 8. The automatic fiber cutting machine manufacturer cutting machine tool, the reconstruction of the control system is due to processing Depending on the task, the mechanical actuators used may also be different. Under the condition that the mechanical system of the machine tool changes, the configuration of the control system corresponding to each task plan also needs to be reconstructed. Therefore, the reconfiguration of the reconfigurable group of automatic fiber cutting machine manufacturers has been completed. The software module of the control system must be restructured to match. According to the modular programming concept, the CNC system of the reconfigurable group automatic fiber cutting machine manufacturer is divided into multiple modules. When working together, each module passes through the interface between each other. Complete the determined task. According to the monitoring and control needs of the control system, the user interface interface is based on Model. The structure of ViewControl (MVC) is designed. The control system starts from obtaining the processing task, and has a pre-processing module to analyze the processing task. And get the code, quantity, material, and cutting position of the processed workpiece. The cutting outer diameter, cutting length, cutting thickness, cutting speed, cutting method and cutting process of the pipe workpiece; the parameter setting module of the control system is available for users to modify parameters; the processing management module is available for inputting operating instructions, controlling the process, and completing the entire processing Work flow: The display module displays process control parameters, status information and motion trajectories.
Taiwan group of automatic fiber cutting machine manufacturers are convenient for operators to debug and monitor the operation of the system. The processing management module H displays the relationship between the modules of the user interface of the module circle 9 and because the cutting machine of this CNC station group automatic fiber cutting machine manufacturer can control up to 6-axis linkage, so according to the processing requirements, 2' axes can be freely configured. Take the motor configuration in a 5-axis CNC system as an example: in the process of reconstruction. From the perspective of reconfiguration, the author proposes a reconfigurable CNC station group automatic fiber cutting machine manufacturer cutting machine. Both overcome The traditional group of automatic fiber cutting machine manufacturers have a single adaptation to processing tasks. It also fully considers the scalability and openness of CNC equipment. It reserves various module interfaces, which can be added, deleted or replaced according to production needs Through the few improvements possible, we will continue to meet new requirements as quickly as possible, thereby minimizing the cost of transforming and updating the automatic fiber cutting machine manufacturers of the group, and eliminating the redundancy of resources. And idle, improve the utilization rate of the group of automatic fiber cutting machine manufacturers. Reconfiguration of the CNC group of automatic fiber cutting machine manufacturers The cutting machine can control the linkage of up to 6 degrees of freedom: left and right (Ge axis), lift (Y axis) , Up and down (z axis), front and back (U axis), swing (A axis) and rotation (day axis). It depends on the processing task or processing technology. Choose the reconfigurable mechanical module in the module library, and it can be larger Utilize system resources wisely, reconstruct the original configuration and system, change its function and structural configuration, adjust system functions and manufacturing capabilities to adapt to product changes or changes in market demand. The design has been patented and used In the actual product project, good economic benefits have been achieved.
This article was published by the original