The research and development of automatic fiber cutting machine solves the modern frame structure

Taiwan group automatic fiber cutting machine completes the mechanical transmission of the cutting head through the motion scheme designed by each axis powder according to the calculation results to complete the cutting of pipe fittings and metal structures. And the body cutting process is as follows: when cutting the branch pipe without bevel, the cutting task is completed by the joint rotation of the pipe fitting (Qing) and the axial movement of the cutting torch (Y axis), and when cutting the branch pipe with slope r. The cutting task is completed by the joint rotation of the pipe fittings (wrong axis), the torch axial movement (Y axis) and the turning torch yaw (U axis) axis. When a hole without welding slope is opened on the main pipe. Move axially by the cutting torch (Y axis), telescopic ‘X axis). The three-axis linkage of the recovery arm descending (Z axis) completes the cutting task. The function of the olive control tube group automatic fiber cutting machine is white. C Long PC400 sets of automatic fiber cutting machines can move independently of each other. This makes it possible to cut bamboo to complete different motion trajectories relative to the fixed pipe. Moreover, the sensitivity of each movement is high, so it is possible to cut out pipe fittings with completely different shapes, sizes and grooves according to specific needs. It can cut multiple intersecting line holes of different directions and different diameters on the main pipe. Satisfy the condition that the axis of the branch pipe and the axis of the main pipe eccentrically and non-eccentrically intersect perpendicularly. It can cut cylindrical intersecting line rui head at the end of branch pipe to meet the conditions of eccentric and non-eccentric perpendicular intersection and tilt-brake intersection between the branch pipe axis and the main pipe axis. Ability to cut the oblique end face at the end of the round pipe, to cut the swing joint elbow on the round pipe, to cut the oblique section at both ends of the 'shrimp sectionSlope n surface, can cut square holes and waist-shaped holes on round pipes.

Taiwan group automatic optical fiber cutting machine can cut steel pipe, live element phase, grade fire and cut sail. The application advantage of using CNC pipe intersecting line flame cutting and turning machine Compared with traditional manual cutting, the cutting of metal pipe fittings and structural parts has great advantages. Run, stare at the rose, and detail Jnn. Bie Nayun. Twenty, such as the dirty field. The pollution. The bottom, the bit. Buildings gradually use a large number of steel structures and non-ferrous metal components to improve the building structure, or directly replace the nirvana concrete structure with steel structures to improve the mechanical properties of the building's tensile, compressive and shielding resistance. The connection of the metal structure, especially the construction of stadiums, exhibition centers, etc., which require large-span structural components on the left, requires special structural features to open the joints. However, the pipes manufactured by the traditional manual cutting process are difficult to cut through intersecting lines and the efficiency is low. The tip is not high. It has not been able to meet the requirements of modern structural analysis. The development and application of the automatic optical fiber cutting machine for the flame cutting of the olive control tube phase Jiaxian line successfully solved the problems of low cutting precision, poor cutting quality, and low cutting efficiency of the parts used in the modern frame structure. Use F to protect the squid, the structure of the group of automatic fiber cutting machines.

This article is published by the original