loading

Global Premium Brand of Laser Equipment , Focus on High Precision Metal Cutting.

the benefits of using the c02 laser in cosmetic eye surgery

Carbon dioxide (CO2)
Laser is a common equipment in hospital operating room, doctors have been using laser for many years.
But an eye facial plastic surgeon is one of the few people who use CO2 laser in eyelid plastic surgery ---
Cosmetic repair of eyelids-
Helping his patients to look and feel younger, less traumatic, and less recovery time.
\"A small number of doctors are using lasers for plastic surgery,\" said Jeffrey Schiller, MD . \" He has been using CO2 laser for upper and lower eye bags for more than 20 years.
\"The hospital has it and it is used by gynecologists, pedicure and general surgery.
I don\'t know why there will be more plastic surgeons who don\'t use it. \"Dr.
In early 1990, Schiller became an early adop of the CO2 laser, and he was immediately aware of the benefits that the laser provided during surgery and rehabilitation.
Graduates of Rutgers University
At the New Jersey Medical School, he has done more than 10,000 eyelid and facial beauty reconstruction operations.
He uses CO2 lasers in all cosmetic surgeries and most plastic surgeries.
Although lasers for beauty enhancement are often associated with improving the appearance of the skin by reducing pigmentation and eliminating blood vessels, CO2 lasers in eye bag shaping are used as cutting tools
Schiller said there are many advantages.
\"Bleeding, bruises and swelling are significantly reduced compared to the use of a surgical knife, which gives surgeons a greater ability to see areas being treated,\" the board said . \"
Certified surgeon, is a recognized leader in eye and facial beauty and reconstruction surgery.
\"When you bleed during a traditional operation, it is usually treated with a burning device, burning the tissue.
If you have a fair amount of bleeding, you have to do a fair amount of burning, which can lead to scars and complications. \"Dr.
Schiller also said that CO2 lasers reduce the chance of complications during surgery.
\"One of the most common complications of lower eyelid eye pouch plastic surgery is eyelid shedding or pulling down,\" he said . \".
\"Due to less bleeding using CO2 lasers, this is less likely to occur.
\"A decrease in bleeding also means a shorter time in the operating room.
\"You don\'t need to stop and burn often . \"Schiller said.
Eye bag Rhinoplasty reduces the pouch and sagging of the lower eyelid and removes the excess skin of the upper eyelid, making the patient look younger and fresher.
According to the American Association of Plastic Surgeons, eyelid surgery is the third most common cosmetic surgery in 2012, and the number of people undergoing eyelid plastic surgery is increasing every year.
For eyelid plastic surgery patients, rapid recovery of normal activity is essential, and the recovery time using CO2 laser is shorter than that of traditional surgery, ranging from five to ten days compared to three to four weeks.
\"The patient looks natural and young . \"Schiller said.
\"Even their friends didn\'t know they had surgery. \"Laser-
However, for those with thick eyelids, surgery alone may not be the best option, such as in Asian patients.
In these cases, Dr.
Schiller said he chose to make the original cut with a surgical knife and use the laser to do the remaining slices. Dr.
Schiller, also known for his innovative technology, used a CO2 laser in lower eyelid shaping to lift the upper cheek to a depression below the eyelid to create dramatic regeneration of the middle eyelidface.
The rate of recovery for this operation is usually two to four weeks, depending on the range in which the laser removes fat and releases ligaments. Dr.
Professor Schiller, his country. of-the-
Art techniques by other plastic surgeons in the United States and five countries on two continents. Dr.
Schiller is a certified board member of the American Committee of ophthalmology and a member of the prestigious American Society of Plastic Surgery and reconstruction surgery for ophthalmology.
He has offices in Edison, Manhattan and Staten Island. Y.
More information about CO2 lasers-
Or arrange for consultation, telephone (888)370-
1001 or visit beautiful eyes. com.

GET IN TOUCH WITH Us
recommended articles
Work Team Customer Visit Company news
The first CO2 lasers invented in the early 1960s were DC glass lasers.
Laser perforation
Pulse laser can be used for perforation.
The use of laser has become more and more mature after decades of development, which has brought tremendous changes to the global manufacturing industry, especially the sheet metal processing industry.
There are many types of guardrails, and the materials are mainly metal composite pipes such as stainless steel.
China’s laser technology has reached the international trend list, but many people don’t know the difficulties involved.
CO2 and fiber lasers are the most common types of lasers used for material processing, including laser cutting, laser engraving and laser marking.
To give full play to the effectiveness of CNC laser cutting machine tools, it is necessary to use typesetting software and laser cutting automatic programming software.
On the afternoon of October 2, the Royal Swedish Academy of Sciences with a history of nearly 300 years announced the 2018 Nobel Prize in Physics.
The fiber laser has a waveguide structure, which can generate a higher power density in the fiber core.
Main features of fiber laser cutting machine: 1.
no data
Mobile / Whatsapp / Wechat:
+86-15610137252
Tel : +86 0531-82035887
Address: Floor 19, Building A3-4, Hanyu Jingu, Licheng District, Jinan City, Shandong Province, China
Customer service
detect