Taiwan group automatic optical fiber cutting machine ensures that each of the factory guide rails and beams has high compression resistance, high precision, low tolerance, and is not easy to deform after long-term use. Anti-interference: High-frequency anti-interference equipment is installed inside the host and the system, and high-quality shielded wires are used for internal wiring to effectively prevent the plasma high-frequency interference system from causing the system to work abnormally. Accuracy: The running accuracy of this machine is up to 0.2mm. The workpiece is cut completely and moved in place with small errors. Test before leaving the factory: After the product is assembled and offline, the whole machine will be tested for drawing. To supplement and fine-tune the tolerances of guide rails, beams, and host positioning sliders. Then proceed to Title 24: CNC cutting machine and special plasma cutting machine for steel plate Price library number: Performance characteristics: The beam is designed with a light structure, which has the characteristics of good rigidity, light weight, and small inertia. Gantry structure, Y-axis adopts synchronous double-motor double drive and X.Y.Z three-axis adopts double linear guide, stable transmission and high operation accuracy. Jinan Jinghui produces high-quality products and automatically optimizes the processing sequence. At the same time, it can also be manually adjusted to reduce processing time and improve processing efficiency. Unique breakpoint and power failure processing, the machining process can move forward and back along the track, and flexibly handle the arc and power failures encountered during the machining process. After the system loads the graphics and image data, it can be typeset and edited (such as zooming, rotating, aligning, copying, combining, splitting, smoothing, merging, etc.). Jinan Jinghui mobile phone 130660022334, matched with other advertising equipment (blister machine, gear cutting machine, engraving machine), forms an assembly line of advertising characters processing technology, and completely solves the traditional manual processing methods. The work efficiency is increased by several tens of times. The cutting opening is small, neat, and there is no slag drop, which avoids secondary trimming.
Taiwan group automatic optical fiber cutting machine is suitable for iron, aluminum, galvanized, white steel, gold and other metal plates. The cutting speed is fast. The working principle of the brand of automatic optical fiber cutting machine for metal group group. The laser is a kind of light. Like other luminous bodies in nature, it is produced by the transition of atoms (molecules or ions, etc.) and is caused by spontaneous radiation. Although the laser is light, it is obviously different from ordinary light in that the laser only relies on spontaneous emission for a very short time, and the subsequent process is completely determined by the excitation radiation, so the laser has a very pure color and almost no divergent directivity. , Very high luminous intensity. The laser also has high coherence, high intensity, and high directivity. After the laser is generated by the laser, it is transmitted by the reflecting mirror and irradiated on the processed item through the focusing mirror, so that the processed item (surface) is subjected to strong thermal energy and the temperature increases sharply. The point is quickly melted or vaporized due to high temperature, and the operation track of the laser head is matched to achieve the purpose of processing. The application of laser processing technology in the advertising industry is mainly divided into two working methods: laser cutting and platform group automatic fiber cutting machine. For each working method, we have some differences in the operation process. Taiwan group automatic fiber cutting machine: It is mainly carried out on the surface of the object, and it is divided into two types: bitmap engraving and vector engraving: bitmap engraving: we first carry out the screen processing of the graphics we need to engrave in PHOTOSHOP and convert them into Monochrome BMP format, and then open the graphic file in the dedicated station group automatic fiber cutting machine cutting software. According to the material we are processing, we can set the appropriate parameters, and then click to run, the group of automatic fiber cutting machine will engrave according to the dot matrix effect produced by the graphic file.
This article is published by the original