Single table operation of fiber laser cutting machine
This new version of this applicable publication discloses a single-table fiber laser cutting machine, which includes a supporting table, a guide beam is provided on one side of the supporting table, and a slidable stage is provided on the upper end of the supporting table, so Both ends of the support platform are provided with baffles, one end of the wide guide beam of the baffle is provided with a limit block, the two ends of the carrier near the guide beam are provided with sliding blocks, and the guide beam is provided with a transverse slider , The upper end of the transverse slider is continuously provided with a rollable torsion table, the torsion table is provided with a supporting prism, the supporting prism is provided with a guide longitudinal beam, and the guide longitudinal beam is provided with a guide groove, so The guiding longitudinal beam is provided with a longitudinal moving motor continuously cooperating with the guiding groove, the longitudinal moving motor is provided with a cutting head, and one end of the supporting table is provided with a grasping area. This is a single-table fiber laser cutting machine that is suitable for the new publicity, with fast processing speed and high precision, and it can cut and process complicated graphics.
A dual-purpose fiber laser cutting machine for plate and tube, which includes a mechanical casing. The bottom end of the side wall of the working table is divided into an air outlet and a dust collector. There is a continuous output pipe on the air outlet, and the end of the output pipe apart from the air outlet continues to have a dust removal box. The output end of the drive motor is equipped with a blade. The other end of the dust removal box is equipped with a ventilation duct. Dust collection pipe, one end of the dust collection pipe continues to have a dust collection box. After the drive motor mobilizes the blade to twist, the wind produced by the blade twist is squeezed from the air outlet along the output pipe, and the dust on the working table is blown into the dust collection port. The dust pipe comes into the dust box, which has beneficial results: such a simple assembly layout, convenient application, can effectively clean up the dust in the work table, and prevent the dust from being inhaled into the body.
/