Safety protective equipment for automatic fiber laser cutting machine
The whole automatic fiber laser cutting machine is equipped with safety protection devices such as a fully enclosed laser protection room and grating protection device. In addition, the advanced cutting monitoring system ensures the safe operation of the equipment and facilitates the user to monitor the entire operation of the equipment. This machine comes standard with German IPG original 1Kw or 2Kw fiber laser generator, Precitec*Lightcutter' cutting head. 2.4Kw, 3Kw or 4Kw laser generator and corresponding Precitec cutting head are also optional. Standard double-layer fast automatic exchange The exchange time of the worktable is short (s13s), and the double racks do reciprocating movement at the same time when exchanging, without lifting, high exchange efficiency, reliable operation. Features of this machine: high operational reliability, high cutting efficiency, easy operation, low use and maintenance costs 。Two equipment parameters working range X axis 3025mm Y axis 1525mm Z axis 300mm greater positioning speed X axis 100m/min Y axis 100m/min X-Y axis movement 140m/min greater cutting speed 60m/min acceleration X axis 10m/s^2; 15m /s^2Y axis 10m/s^2; 15m/s^2 positioning accuracy positioning accuracyu003d0.03mm repeat positioning accuracy +0.01mm cutting accuracy ISO9013232 total equipment mass 10.000kg single rack load 750kg equipment area 9700mmx6500mm total power 60KVA Power supply 380V (two 10%); 50Hz three_model configuration 1. Standard configuration item number Product name quantity Remarks 1 host 1 set of gantry structure type bilateral pinion and rack drive 2 exchange table 1 set of 3x1.5m exchange table 3 CNC system 1 set of German GlobalControlLaser Swiss Gudel rack. German Alpha gearbox. 4 drive system and mechanical mechanism 1 set of German giant Beckhofi servo drive Leitong Jiangsu Weixiang New Energy Automobile Co., Ltd. Fiber laser cutting machine Speaker: Working principle of fiber laser cutting machine CO2 Compared with fiber laser generators, many companies are now using laser cutting machines, laser die cutters, and laser engraving machines.
Do you know what is the most important thing about laser equipment for automatic fiber laser cutting machines? Lasers. So what is the difference between CO2 lasers and fiber lasers? At present, CO2 lasers are the mainstream laser processing lasers, followed by lamp-pumped solid-state lasers, followed by fiber lasers for small and medium power. The data shows that fiber lasers are pumped back by lamps. The sales volume ratio of bulk lasers and DPL lasers in the processing field is 4:3.1:2.9; but the average sales prices of high-power CO2 lasers, lamp pumps, optical fibers, and DPL (diode pumps) are 150,000 US dollars and 65,000, respectively. 29,000, 10,000. At present, fiber lasers have not achieved the 'obvious advantages of high conversion efficiency and very good beam quality.' According to relevant data, they use SPI200 watt fiber lasers from Guangzhou Industrial Research Institute to cut 1 mm thick steel plates. The speed is not fast, 1.5 mm can not be cut, and according to an imported 500 watt lamp pump laser in Chongqing, it can cut 3 mm steel plate at a power of 300-400 watts; according to a 2006 LFW newsletter, a 1000 watt optical fiber The speed of laser cutting 0.5 mm steel plate greatly exceeds CO2, and cutting a 3mm pair is far inferior to CO2. This urgency just shows the fact and basis that a fiber laser is not accepted by the high-power processing market!
This article is published by the original