Safety protection device for fiber laser cutting

The safety protection device for fiber laser cutting, the pipe cutting machine should be able to easily adjust the laser power, frequency, duty cycle and other parameters. The auxiliary cutting gas used during cutting should be convenient for gas switching and pressure adjustment. The rotating platform should be able to clamp the pipe firmly, and the clamping force can be adjusted according to the section and wall thickness of the pipe. The rotating platform should be able to rotate clockwise and counterclockwise, and can drive the pipe to move along the pipe axis. The rotation speed and the shaft cooling device should be able to maintain the temperature for the laser generator, cutting head, lens and other functional components to work normally. The cooling device should be able to maintain the temperature that allows the laser generator, cutting head, lens and other functional components to work normally. Important parts such as welded parts, machined parts, main bed, beams, etc., should be aged after rough machining. The welded parts of the pipe cutting machine should comply with the regulations of JB/T8609, and the processed parts should comply with the regulations of JB/T1829. The wear-resistant parts of important parts and components shall be subjected to wear-resistant measures that are compatible with their service life. The pipe cutting machine should be assembled in accordance with the assembly operation instructions. During partial assembly or final assembly, gaskets and sleeves that are not designed on the drawing should not be installed. The important joint surfaces should be tightly fitted. After tightening, use a feeler gauge to inspect. Those without special requirements allow the thickness of the feeler gauge to be inserted should not be large. The CNC laser pipe cutting machine must have a reliable safety protection device.