Regular inspection of fiber laser cutting machine
Check the laser of the fiber laser cutting machine. The specific maintenance of the laser is based on the manual of the selected laser. Daily maintenance The laser should be maintained before starting daily. Inspection of working gas and cutting gas: The pressure value measured by high-purity N 2 should be greater than 6kgf/cm 2. If it is lower than this value, replace the gas cylinder. At the same time, the fiber laser cutting machine that checks the gas in the auxiliary gas cylinder for cutting is compared with the traditional high-power laser cutting machine. Fiber laser cutting technology has only appeared in the past 3 to 5 years. Although many companies are just beginning to understand this technology, they are also beginning to realize the difference between fiber laser cutting and the more common CO2 laser cutting. With the continuous improvement of cutting technology, fiber laser cutting has become one of the most advanced technologies in the industry. ??? Thermal cutting methods mainly include flame, plasma and laser cutting technologies, among which laser cutting can achieve better cutting quality, especially for fine features and hole cutting with a diameter and thickness ratio of less than 1:1. As a result, laser cutting technology has become the most suitable method for strict and fine cutting in this industry. In the laser cutting industry, fiber laser cutting has received a lot of attention because it not only provides the speed and cutting quality that can be achieved by carbon dioxide laser cutting, but also reduces maintenance and operation costs.
Fiber laser cutting machine so this makes the fiber laser cutting good morning. Many experts believe that it will soon replace other laser cutting systems. The main advantage of fiber cutting In the carbon dioxide laser cutting technology, carbon dioxide gas is the medium that generates the laser beam. However, fiber lasers are transmitted through diodes and fiber optic cables. The fiber laser system generates a laser beam through multiple diode pumps, and then transmits it to the laser cutting head through a flexible fiber optic cable instead of transmitting the beam through a mirror. This has real advantages, first of all, the size of the cutting bed. Unlike gas laser technology, the reflector must be set within a certain distance. Unlike fiber laser technology, there is no range limit. Moreover, the fiber laser can even be installed next to the contour cutting head of the contour cutting table. The carbon dioxide coated cutting technology does not have this option. Similarly, when compared with a gas cutting system of the same power, the system appears more compact due to the ability to bend the fiber. ??? The most important and meaningful advantage of fiber cutting technology should be its energy efficiency.