Permanent magnet linear motor servo with self-cooling beam for automatic fiber laser cutting machine

A permanent magnet linear motor servo automatic fiber laser cutting machine with a self-cooling beam, including a highly movable beam, a linear motor and a laser tool holder are arranged on the side wall of the beam, and the laser tool holder undergoes a linear motor and The crossbeam slides continuously. The crossbeam is provided with a cooling component that is constant and continuous with the laser tool holder and supplies a cooling air source to the linear motor. The cooling component is a rotating electric fan without an external power supply. The crossbeam and the continuous surface of the linear motor There are wind holes on it. This new type of experience is equipped with cooling components, and the cooling components and the laser tool holder remain unchanged. When the laser tool holder moves, the cooling components will be driven to supply the active cold atmosphere source to the wind hole first, and the linear motor will be cooled. Prevent it from being destroyed by fever, so as to reach the goal of experiencing self-cooling on the beam.

The new intelligent automatic fiber laser cutting machine has a measuring and clean guide rail pad block, including a cutting table and a sliding block. The left side of the cutting table is equipped with a suction port. And a positioning pad is installed on the left side of the cutting table, the fitting between the suction port and the cutting table is continuous, a support rod is arranged above the slider, and the slider is located above the positioning pad. A rotating shaft is arranged between the support rod and the sliding block. The sliding block and the positioning block are continuously fitted. A dust box is installed on the lower left side of the positioning block. The inner appearance of the positioning block is It is equipped with a slide, and an infrared measuring instrument is installed inside the slide. The new intelligent automatic fiber laser cutting machine has a guide block with a cutting table, and the cutting table is equipped with a suction port. This facilitates the dust residue from cutting to be concentrated on the suction port, which is convenient for cleaning. The positioning block is located on the left of the cutting table. Side, it is important to adjust the position of cutting equipment.