Operating Regulations of Fully Automatic Fiber Laser Cutting Machine
Fully automatic fiber laser cutting machine Solid YAG laser is one of the most stable and mature products in the laser field. Applicable materials: stainless steel, carbon steel, alloy steel, spring steel, copper plate, aluminum plate, gold, silver, titanium and other metal plates and pipes Equipped with a high-precision electronic handwheel focusing system u0026 instead of the traditional movement table up and down lifting mechanism, with the optical bench up and down lifting mechanism? Avoid position changes when the table moves up and down, self-vibration and when the optical bench moves up and down Vibration of the light path. The anti-vibration 8 fuselage structure has anti-vibration function, the optical bench and the fuselage have shock absorption function, which reduces the number of light path adjustments and makes the machine more stable. The workbench adopts a design that integrates with the machine and is well integrated. , To make the worktable more reliable, high-speed operation without shaking, the laser power supply tender heating system is equipped with 6 external fans, and the internal space is large, so that the power supply can better heat dissipation. 3. Negative power feedback is set up, and energy is more stable. The 0th revision theme: the promulgation date of the laser cutting machine operating regulations; 2009-08-8 in order to ensure the reliable operation of the laser cutting machine, extend the service life of the equipment, and improve the processing quality , The operating procedures should be strictly followed.
Automatic fiber laser cutting machine-laser cutting machine operating procedures 1. Turn on the main switch of the stabilized power supply, switch the output voltage to the stabilized mode, and do not use the mains. 2. Turn on the main power switch () of the machine tool. 3. Turn on the machine control power (key switch). 4. After the system self-check is completed, each axis of the machine tool will return to the reference point. 5. Start the chiller and check the water temperature and water pressure (normal water pressure is 5bar). Three minutes after the chiller is powered on, the compressor starts and the fan rotates to begin cooling and cooling. Note: The cooling fins of the chiller should be cleaned regularly to avoid excessive dust affecting the work. The evaporated water in the water tank should be replaced every four months. Tap water or pure water should not be used. 6. Open the hydrogen cylinder and hydrogen cylinder, check the pressure of the gas cylinder, and start the air compressor and refrigeration dryer. Note: The filters of air compressors and refrigeration dryers must be drained early every day. The first-stage filter blowing on the outer light path lens side of the Kaibang kitchen and bathroom laser cutting machine operating rules must be checked at any time, and there must be no water or oil, otherwise the lens will be contaminated . The gas source must be improved to make it reach the standard. 7. After the chiller drops to the set temperature (set to 21 degrees), turn on the main power supply of the laser and turn on the low voltage (white button). 8. When the word HV READY appears on the laser panel, turn on the high voltage.