Movement of fiber laser cutting machine manufacturers on the plane of the cutting bed
The movement of the fiber laser cutting machine manufacturer includes movement in the X and Y directions. According to the cutting process, gear transmission is used to cooperate with the movement in the X and Y directions to achieve steering cutting, thereby processing the corners and curves on the path. Cutting, cutting bed plane movement structure, fiber laser cutting machine movement on the cutting bed plane, including movement in the X and Y directions. According to the analysis of the performance of the fiber laser cutting machine and the parameter requirements of the servo motor, we chose Japan Mitsubishi Corporation The servo motor produced is used as the feed drive for the 3-axis of the fiber laser cutting machine control system. The X and Y axis drive sources are selected from Mitsubishi's model following many experiments and improvements to develop a multi-functional fiber laser cutting machine. The machine is small in size, high in efficiency, simple in structure, and not easily damaged. The operation is safe, simple and convenient. Performance analysis and the parameter requirements of the servo motor, as the cutting process, gear transmission is used to coordinate the movement in the X and Y directions to realize the steering cutting, thereby processing the corners and curve cutting on the path, and the plane motion structure of the cutting machine. , The movement of the fiber laser cutting machine on the plane of the cutting bed, including the movement in the X and Y directions. According to the analysis of the performance of the fiber laser cutting machine, the servo motor is used as the feed drive of the 3 axis of the fiber laser cutting machine control system. X, Y axis The driving source is a multifunctional fiber laser cutting machine developed by Mitsubishi's model following many experiments and improvements.
For fiber laser cutting machine manufacturers, the machine is small in size, high in efficiency, simple in structure, and not easily damaged. The operation is safe, simple and convenient. The feed drive of the control system is 3 axes. Among them, the X and Y axes drive with a rated power of 750W. X is driven by the motor 6 and installed on the motor shaft. The belt pulley 5 drives the Guiliang 8 through the X-direction synchronous gear belt 7 to make the Y-direction Gui The beam assembly and the machine head, the device moves in the X direction and the Y direction movement is driven and installed by the Y motor 2. The synchronous belt wheel 3 on the motor shaft is synchronized through the Y direction, and the gear belt 4 drives the machine head to move in the Y direction. During the process of super-falling and cutting of the machine head, gear transmission is adopted to cooperate with the movement in the X and Y directions to realize the turning cutting, thereby processing the corners and curve cutting on the path, the plane motion structure of the cutting table, and the optical fiber laser cutting machine in the cutting table The movement on the plane, including the movement in the X and Y directions. According to the analysis of the performance of the fiber laser cutting machine, the control system of the fiber laser cutting machine has a 3-axis feed drive. The X and Y-axis drive sources are selected from Mitsubishi's model. The following experiments and Improved and developed a multifunctional fiber laser cutting machine. The machine is small in size, high in efficiency, simple in structure, and not easily damaged. The operation is safe, simple and convenient.