Laser protection device for automatic fiber laser cutting machine

Laser protective assembly for automatic fiber laser cutting machine, including bracket, protective cover and laser cutting machine, the protective cover is not fixed on the upper appearance of the bracket, and the front of the protective cover is continuously sealed after the button rolling The front of the airtight door is fixed with a toughened glass window, the front of the airtight door is fixed with a handle, the top of the protective cover is fixed with a dust hood, and the bottom of the dust hood is not There is a filter screen, and a fan is installed on the inside of the suction hood through the supporting rod. This is suitable for a new type of joint venture that has experienced the above-mentioned layout. It has completed the protection of the laser cutting machine's part-time job to the operator while obstructing the operator, while facilitating the inspection, protection and repair of the laser cutting machine.

Fully automatic fiber laser cutting machine, including a body, the bottom of the body is fixed with non-slip support legs, and the center of the front of the body is fixed with a control panel , The inner behavior of the directional chute is provided with a sliding continuous block, the outer behavior of the chip removal port is provided with a chip removal valve, the inner side of the sliding continuous block is unchanged, and a support rod is fixed, and the outer behavior of the support rod A cutting support block is arranged, the support rod passes through the sliding continuous block and the secondary air cylinder continues to behave, the bottom of the cutting support block is fixed with a laser cutting assembly, and the center position of the upper end of the cutting support block is arranged in a manner There is a one-stage air cylinder, and a limit baffle is installed on the side of the end surface of the cutting table. This fully automatic fiber laser cutting machine has been equipped with vacuum fans and waste network boxes on both sides of the body, which can network the waste generated during the part-time cutting, reduce the impact of waste on the part-time cutting, and expand the overall fitness .

This article was published by the original