Laser protection device at the cutting head of automatic fiber laser cutting machine
A laser protection assembly at the cutting head of a fully automatic fiber laser cutting machine, including a cylinder, two guide rods, a protective cover, a solenoid valve, and a master assembly. On the placement base of the cutting head, the top of the protective cover and the piston rod of the cylinder continue to be nested in the guide rod, and the assembly and solenoid valve continue, and the solenoid valve and cylinder continue. After the automatic fiber laser cutting machine, enter the light number control. The air intake of the solenoid valve controls the movement of the cylinder. The protective cover moves with the movement of the piston rod of the cylinder, so that when the cutting light signal is input, the protective cover moves all the way down with the cutting head, so that the protective cover can block the laser during laser cutting. For the purpose of radiation protection, the body of the machine operator is spared from the danger of laser radiation. The new-style layout of this application is simple, good applicability, safe and reliable, and cheap.
A full-automatic fiber laser cutting machine multi-function protective cover, including a base, two supporting rods are arranged above the base, and the supporting rods are fixedly arranged above the supporting rods. Support plate, above the support plate is equipped with a cutting machine, the base is also provided with two cylinder blocks, the cylinder block is provided with a cylinder, the output shaft at the end of the cylinder is fixed to one end of the cross bar, The other end of the rod is fixedly connected with the protective cover, the protective cover is arranged above the support plate, the cross-bars are located on both sides of the protective cover, the support plate is provided with an inspection box, the inspection box It includes a temperature sensor, a light intensity sensor, a driving motor, and a micro processor, and the temperature sensor, light intensity sensor, and driving motor are electrically connected to the micro processor. Compared with the prior art, the multi-effect protective cover of this plan will not cause any damage. At the same time, the layout and construction are simple, manual processing and assembly are convenient, the manufacturing cost is low, and people's application is convenient.
This article was published by the original