Laser fiber laser cutting machine is used for thin-walled tube cutting of on-line tube making machine
An automatic fiber laser cutting machine for cutting thin-walled tubes of an in-line tube making machine. An automatic optical fiber laser cutting machine for cutting thin-walled tubes of an on-line tube making machine, including a main frame; the main frame is provided with a moving area, a second moving area, and a third moving area; the moving area is equipped with torsion laser cutting Assembly; the second moving area is equipped with a blanking component; the third moving area is equipped with a slag blocking component; the slag blocking component includes the fourth moving area, a numerical control slide, a rodless cylinder, a guide rod synchronous torsion motor and a slag blocking tube; The third moving area is equipped with a fool-proof avoidance cylinder. This is a new type of automatic fiber laser cutting machine for thin-walled tube cutting of online tube making machine. It is linked with tube making equipment to cut the tube online. It can process thin-walled tubes. The tube is not easily deformed when clamped. /Electrical line pipes can be pulled around, and the result of slag blocking is good, and the damage is small during pipe processing. The slag blocking tube can avoid torsion laser cutting assembly in real time, avoiding the obstacle to the equipment.
An automatic fiber laser cutting machine for lithium battery tabs, including laser generator, collimation assembly, laser full-transmission assembly, scanning galvanometer assembly, focusing assembly, and laser generation The optical fiber and collimator assembly continue, the output optical path of the collimator assembly and the laser full transmission assembly continue, the output optical path of the laser full transmission assembly continues with the scanning galvanometer assembly, and the output optical path and focus assembly of the scanning galvanometer assembly continue. The laser power monitoring device is continuously installed in the optical path of the fully transparent assembly. The control end of the laser power monitoring device continues with the controller, and the controller continues with the power control end of the laser generator. The scanning galvanometer assembly includes a set of X-axis deflection reflections. Lens and a set of Y-axis deflection mirrors. Field lens is included in the focusing assembly. This new model has the characteristics of no consumables, fast speed, high naivety, strong compliance, and high cutting quality. It can be suitable for products of different varieties and different specifications and models. It can quickly cut lithium battery tabs in a high-speed water line system. .
This article was published by the original