Laser automatic fiber laser cutting top cover
An automatic fiber laser cutting machine for the top cover of a transformer box, including a chassis, the inner cavity of the chassis is divided into an upper cutting cavity and a lower function cavity through the interlayer disk, and the middle of the inner bottom of the upper cutting cavity is provided with a disc shape A base, the upper middle of the disc-shaped base is provided with a disc-shaped cutting arrangement table, a second screw rod is provided on the middle side of the top end of the upper cutting cavity, and a third screw rod is provided on the rear side of the top end of the upper cutting cavity , A lifting cylinder is provided under the second screw position, a laser cutting head is provided at the end of the piston rod of the lifting cylinder vertically downward, and a fourth screw is provided under the third screw position. A landing platform is provided on the outer side of the fourth screw rod, a dust suction frame body is vertically arranged at the lower end of the landing platform, and a dust suction cover body is arranged at the lower end of the dust suction frame body.
Double-head tape automatic fiber laser cutting machine, including a part-time table, one side of the part-time table is equipped with a laser generator, and the bottom of the laser generator is equipped with an electric control A fan is arranged in the electric control cabinet, and the bottom of the part-time table is equipped with a ventilation blanking assembly. The beneficial results of this new application are: different materials and characteristics can be processed, and the results are superior; the size of the processed products is limited, and the equipment is equipped with self-adaptive thickness adjustment, which reduces the technical requirements for the operator, easy to operate, and quick to get started; laser cutting is also available It has dual functions with laser marking.
The automatic fiber laser cutting machine for PET substrate, including the main body of the automatic fiber laser cutting machine and the slide rails arranged on the main body of the automatic fiber laser cutting machine. The side wall remains unchanged and there is a U-shaped plate. The side wall of the U-shaped plate facing the slide rail experiences bearing rolling and continues to have a rotating shaft. One end of the rotating shaft runs through the side wall of the U-shaped plate and extends outwardly, and one end of the rotating shaft does not change. Connected with the bevel gear, the side wall of the U-shaped plate also undergoes the second bearing rolling and continues to have a rotating rod. The rod wall of the rotating rod is symmetrical and unchanged. Configuration, one end of the rotating rod runs through the side wall of the U-shaped plate and extends outwardly, and the outer wall of the U-shaped plate is unchanged with a delay motor. This new type of application can make the pipe body swing back and forth, increase the area of u200bu200bodor absorption, and eliminate the odor generated, ensuring the health of the manipulator's body.