Laser automatic fiber laser cutting machine and automatic clamping type air door mechanism
Active clamping type air door mechanism and automatic fiber laser cutting machine. The technical plan supplied by this request includes a suction pipe, a driving part and a clamping part; the suction pipe is provided with a plurality of suction openings and dampers; the driving part and the clamping part are arranged on the suction pipe; The driving part drives the air door to open or close the air suction opening; the clamping part clamps the air door to the air suction pipe when the air door closes the air suction opening, with good sealing performance, The layout is simple and reliable. After the driving part drives the air door to open and close, after the air door in other exhaust areas is closed, the clamping part clamps the air door on the exhaust pipe so that the air door is close to the exhaust pipe, which is better The air-tightness of the damper is improved. After the damper is closed, no air leakage is ensured to ensure that there is sufficient air volume in the current exhaust area, and the result of exhaust and dust removal is guaranteed.
The automatic fiber laser cutting machine with software air-cooling assembly, including: an air-cooled machine for producing cooling gas, a laser tube that contains the laser light experience, and a machine that remains on the ground. The rack, further comprising: a cooling box as a cooling air cycle chamber; a dry box for removing moisture from the cold air; the cooling box is not on the rack, the dry box and the air cooler are both unchanged On the ground; every two of the cooling box, drying box, and air cooler experience similar pipes. This device is suitable for the new model. It has been equipped with a cooling box to supply the air-cooled cycle chamber and simplified the cycle circuit, has been equipped with a dry box to absorb moisture in the gas, has been equipped with a filter to remove dust and large particles in the cooling gas, and has been equipped with a rubber plug Change the laser tube and dampen the laser tube. After assembling real software, the implementation results are good, and there is an inevitable software implementation cost.
This article was published by the original