How to use the circulating cooling system of fiber laser cutting machine

The cycle cooling system for fiber laser cutting machine, the water chiller, the laser cooling water circuit and the cutting head cooling water circuit, the laser cooling water circuit successively continuous outlet pipe, filter, continuous water pipe, laser water cooling plate and return pipe, the outlet pipe and One water outlet of the chiller continues, the return pipe and the chiller continue, the cutting head cooling water path continues in sequence, the second outlet pipe, the second filter, the second continuous water pipe, the cutting head water cooling plate and the second return pipe, the second The outlet pipe continues with the other outlet of the chiller, and the second return pipe continues with the chiller. The filter cleaning components and cleaning components can remove the impurities deposited on the filter cartridge of the filter, so the fiber laser cutting machine The cycle cooling system can slow down the time for impurities to block the filter holes of the filter cartridge, thereby reducing the frequency of replacement of the filter cartridge and lowering the cost.

Fiber laser cutting machine blanking network bucket, bottom frame, network bucket, the bottom frame is the laser cutting machine bottom frame, the top of the bottom frame does not have a part-time table, network bucket It is a square frame layout. The bottom frame is symmetrically provided with tracks along the length of the laser cutting machine. The guide rails are arranged under the part-time table. The network bucket can slide along the track along the length of the laser cutting machine. One end of the network bucket is equipped for dust prevention. Of roller blinds. The beneficial result is that it can accommodate small workpieces and facilitate the network.

The fiber laser cutting machine with active material distribution, along the feeding path of the clamping chuck, is configured with the base station, the second base station, the second base station, the second base station, and the second base station. The two bases are equipped with collecting troughs along the lower side of the width of the platform. The inside of the base is a waste cavity and the table has a cavity opening. The edge of the cavity is continuously rolling with a distribution plate. The waste cavity is equipped with a rolling distribution plate cage. The driving unit a of the cover or the hole opening the cavity, the second base is equipped with a support disk and the corresponding table surface has a through hole, and the driving support disk is also arranged between the support disk and the second base to protrude or protrude in the vertical deflection direction. Drive unit b submerged in the second abutment table. Workpieces and wastes can be divided into a network in the collecting trough to improve manufacturing compliance and effectively reduce the rate of defective parts. /