How to use the automatic fiber cutting machine

Taiwan group automatic fiber cutting machine has more than 35,000 square meters of independent technology industrial park in the core area of u200bu200bOptics Valley, China. 3-5 new products are launched every year, and there are currently more than 50 types of products for customers to choose from. For many years, we have always focused on doing one thing only CNC cutting machine. He has experience in cooperating with many large enterprises including Wuhan Iron and Steel Group, Sany Heavy Industry, Shaanxi Automobile Group, Luoyang Yituo, etc. There are branches or offices in all major provinces and cities across the country, and the pre-sales and after-sales service system is perfect. Taiwan group automatic optical fiber cutting machine has reliable quality from stock, fast processing, adopts the latest technology, fine CNC plasma cutting machine manufacturer recommends Wuhan Xinhuo Technology, order hotline 027 safe operation specification version of metal cutting machine: V1.0 safe operation of metal cutting machine Standard responsible department: Quality Supervision Department Date: 2020.10 Countersigning Department: Date: Revision Record Date Version Number Content Writer Reviewer Approver 2020.10V1.0 Establishing the preparation system 1/4 The purpose of the safety operation specification of metal cutting machine is for operation at work Standardized operations by personnel, learn safe operation procedures, master safe operation techniques, and avoid safety accidents. The scope of application is applicable to the bow saw machine, grinding wheel cutting machine, pipe thread cutting machine, metal circular saw machine, metal band saw machine, etc. used in daily maintenance and daily inspection in Kunming Country Garden Theme Park Management Co., Ltd. Management Responsibilities/Job Responsibilities and Authorities Engineering Equipment Department Engineering is responsible for the safety issues of construction within the jurisdiction. The safety issues group is responsible for the quality of the construction within the jurisdiction. The work requirements/management and control points must be carefully checked before the use of the equipment performance and maintain each Integrity of components. The power switch, the tightness of the saw blade, the saw blade guard or the safety baffle shall be inspected in detail. The front desk of the operation cutting must be stable, and there should be sufficient lighting brightness during night operation. Before you are ready to use, turn on the main switch and make a few rounds of no-load test. After confirming that it is safe and correct, it is allowed to start. Before operation, you must check whether the power supply is consistent with the conventional rated 220VA voltage on the power tool, so as not to connect it to the 380VA power supply by mistake. The operator must be familiar with the structure, performance, operating system, transmission system, protective device, lubrication parts, electrical and other basic knowledge and usage methods of this machine tool.

Before operating the Taiwan-group automatic fiber cutting machine, wear labor protection equipment according to the regulations, and the female worker must press her hair into the work cap. It is strictly forbidden to wear gloves, a scarf, and apron when cutting. Pay attention to check the position of the handles, the transmission parts, the protective cover, and the limit device before starting the car. Whether the tool is firm and reliable, whether the cutting fluid meets the requirements, and the electrical protection is reliable. After inspection, perform pre-shift lubrication and refueling according to the parts and oil quantity specified in the machine's lubrication chart. After inspection and refueling, the operator drives the machine idling at low speed for 3~5 minutes to check whether the machine tool is running abnormally, the lubrication of various parts, the lubricating oil level, whether the joystick is flexible, whether the reciprocating mechanism is positive 2/4 is always reliable, mechanical, Whether the electrical limit is reliable, whether there are cracks in the tool and the grinding wheel. The grinding wheel must be replaced before the grinding wheel cutting machine is used for more than one month. When processing, you must concentrate, and it is strictly forbidden to talk to others. It is strictly forbidden to leave the post when the knife is automatically moved; it is strictly forbidden to polish the burrs on the side of the grinding wheel cutting machine; it is not allowed to use beyond the specification; it is not allowed to remove the mechanical and electrical limits at will; it is not allowed to place extra items on the workbench; Use rope or wire bolt handles for manipulation and processing. You must stop when you leave the machine tool, and turn off the power when it takes a long time. The tool clamping is flat, firm and reliable, and check for looseness at any time.