How to use fiber laser cutting machine

A fiber laser cutting machine for an interchange field, including a transportation field, an interchange field, and a cutting field. A transportation chassis is provided under the transportation field, and an interchange chassis is provided under the interchange field. A cutting chassis is provided under the cutting area, universal wheels are provided under the conveying chassis, the interchangeable chassis, and the cutting chassis, and a conveying motor is provided on the conveying area. A conveying wheel is provided, and a helping conveying wheel is provided on the conveying field. Favorable results: the material is transported through the supply of the transportation motor and the energy is supplied by the drive motor to the main drive wheel, so that the interchange field can accept and convert the material, convert the material to the cutting field, experience the transportation of the cutting and transport motor, and The joint laser cutting machine cuts the material, and the use of the positioning plate can position the material before cutting to prevent the material from deviation.

Fiber laser cutting machine, including a working table, the inner cavity of the working table does not change horizontally and continuously has an arrangement frame, and the front and rear sides of the top appearance of the working table are unchanged and continuously have a positioning plate , The middle part of the top appearance of the positioning plate does not change horizontally and continuously has a sliding rail. This applies to the new-style experience configuration slide rail, running drain motor, skateboard, third slide rail, sliding block, third slide board, bearing plate, landing motor, second row drain motor, second skateboard, support frame, cantilever beam, second The joint application of the slide rail and the constant plate can move the fiber laser cutting machine in all directions, so that the cutting results of the fiber laser cutting machine are better, and the fiber laser cutting machine cannot be moved in all directions during the work. , Causing the fiber laser cutting machine to have a dead angle during cutting, resulting in the inconvenient application of the fiber laser cutting machine, which greatly improves the applicability of the fiber laser cutting machine.