How to use and maintain fiber laser cutting machine
How to use and maintain fiber laser cutting machine? When using fiber laser cutting machine to process objects, you need to learn the equipment use and maintenance skills of fiber laser cutting machine in order to better exert the effect of the equipment , It greatly improves the working efficiency of the equipment. How to use and maintain the fiber laser cutting machine: Check the steel belt frequently to ensure that it is tight. Otherwise, if there is a problem in operation, it may hurt people, or even cause death. The steel belt looks like a small thing, but the problem is still a bit serious. Check the straightness of the track and the machine every six months Verticality, if found to be abnormal, maintain and debug in time. If this is not done, the cutting effect may not be so good, the error will increase, and the cutting quality will be affected. This is the top priority and must be done. Use a vacuum cleaner to remove dust and dirt from the machine once a week, and all electrical cabinets should be closed to prevent dust. The guide rails should be cleaned frequently to remove dust and other debris to ensure that the equipment is normal. The rack should be frequently wiped and lubricated to ensure lubrication without debris. The guide rails should be cleaned and lubricated frequently, and the motor should also be frequently cleaned and lubricated. By cleaning and lubricating the machine, the machine can move better and cut more accurately, and the quality of the cut products will be improved. The dual-focus laser cutting head is a fragile item on the laser cutting machine, and it is used for a long time. , Resulting in damage to the laser cutting head. The fiber laser cutting machine needs to be checked and maintained regularly. If there is any deformation or other forms, you should say that the laser cutting head is a little damaged and needs to be replaced. Failure to replace it will affect the cutting quality and increase the cost. Some products may have to undergo secondary processing and reduce production efficiency. The laser cutting head needs to be produced by Huagong French cuisine, and it must be carefully checked when the goods are purchased to avoid problems when using it. The beam shape of the fiber laser cutting machine is based on a principle, that is: Compared with the traditional laser cutting using a single circular laser beam, the new cutting process uses a complex laser beam shape. Utilize the unique high-power single-mode fiber laser once a week to vacuum the dust and dirt in the machine, and all electrical cabinets should be closed and dust-proof.