How to use and maintain fiber laser cutting machine1
How to use and maintain fiber laser cutting machine? When using fiber laser cutting machine to process objects, you need to learn the equipment use and maintenance skills of fiber laser cutting machine in order to better exert the effect of the equipment , It greatly improves the working efficiency of the equipment. How to use and maintain the fiber laser cutting machine: 1. Check the steel belt frequently to ensure that it is tight. Otherwise, if there is a problem in the operation, it may hurt people or even cause death. The steel belt looks like a small thing, but the problem is still a bit serious. 2. Check the straightness of the track and If the verticality of the machine is found to be abnormal, it will be maintained and debugged in time. If this is not done, the cutting effect may not be so good, the error will increase, and the cutting quality will be affected.
This fiber laser cutting machine is the most important thing and must be done. 3. Use a vacuum cleaner to remove dust and dirt from the machine once a week. All electrical cabinets should be closed and dust-proof. 4. The guide rails should be cleaned frequently to remove dust and other debris. To ensure that the equipment is normal, the rack should be frequently wiped and lubricated to ensure lubrication without debris. The guide rails should be cleaned and lubricated frequently, as well as the motor. Frequent cleaning and lubrication should be carried out so that the machine can move better and cut more accurately, and the quality of the cut products will be improved. 5. The dual-focus laser cutting head is vulnerable to the laser cutting machine. Items, long-term use, cause damage to the laser cutting head. The fiber laser cutting machine needs to be checked and repaired regularly. If there is any deformation or other forms, you should know that the laser cutting head is a little damaged at this time and need to be replaced. Failure to replace it will affect the cutting quality and increase the cost. Some products may have to undergo secondary processing and reduce production efficiency. The laser cutting head needs to be produced by Huagong French cuisine, and it must be carefully checked when the goods are purchased to avoid problems when using it. Custom beam, the custom beam shape in the fiber laser cutting machine is based on a principle, that is: Compared with the traditional laser cutting using a single circular laser beam, the new cutting process uses a complex laser beam shape. Utilize the unique high-power single-mode fiber laser. 3. Use a vacuum cleaner to remove dust and dirt from the machine once a week. All electrical cabinets should be closed and dust-proof.