How to extend the application of fiber laser cutting machine

There are relatively many industries using fiber laser cutting machines, and the equipment is not low in cost. For a few small processing institutions, their considerate key question is how to extend the application life of fiber laser cutting machines, thereby reducing The economic pressure and economic burden brought about by the replacement of equipment.

Before applying the equipment, you must carefully study the relevant information of the fiber laser cutting machine, especially the application method and operation process of the equipment, and pay attention to incidents. In this way, the equipment can be operated normally in the application, and it will not be found that the equipment is obstructed due to improper operation. At the same time, for the user who manipulates the application equipment for the first time, it is necessary to ask professional technical staff to guide them so that they can be Independent control.

Hardware products factories use tube laser cutting machines more, and a few complicated and applicable products are processed with laser tube cutting machines to have the most amazing results. Added more colors to our survival! In addition, the decoration processing of metal products is gradually becoming popular in the home, and the increasingly popular metal screens are also processed by laser cutting machines. This is because the laser cutting machine processes metal, you only need to plan the graphics on the computer, and then you can find the desired graphics immediately, with the graphics, the size and the depth of the adjustment, the accuracy, the speed, the code words are smooth and without burrs, ' 'No-touch' processing does not crush the advantages of materials. In the metal decoration processing industry, these points are far from being compared with ancient processing techniques.

To enhance the protection and maintenance of the fiber laser cutting machine, generally speaking, the following two points should be highlighted: First, pay attention to the cleanliness of the equipment surface. If there is dust on the equipment surface, Rinse in real time to keep it connected neatly. The second is to change the different oils and liquids in the equipment, so that the equipment can work and operate in a relatively superior condition.

To pay attention to the technical function of the equipment in real time. In normal operation and application, the method of listening to the sound and looking at the surface can be used to verify whether the equipment is normal. If the fiber laser cutting machine is abnormal, the equipment should be stopped immediately to check the obstacles that may be found. It is destroyed in real time. When the equipment is not used for a long time, the equipment must be operated on schedule to keep it in a superior condition.

The surface quality of the road bridge guardrail produced by the fiber laser cutting machine is incomparable with that of the plasma blanking product, and the guardrail post of the fiber laser cutting machine can be discovered in the smallest place. The gap between the hole and the tube can be less than 1. mm. Greatly improved the quality and aesthetic level of all guardrail projects. Fiber laser tube cutting machine is a special machine that uses laser technology to perform various graphic cutting on pipe fittings and profile lengths. It is a high-tech product integrating numerical control technology, laser cutting and machinery. With features such as saving, high speed, high precision, high obedience, and high cost performance, it is equipment for the non-touch metal pipe processing industry. Have several advantages underneath.

1. The cutting precision is high, and the dimensional precision is high, the meaning is flat and clean, no secondary processing is required, and the material consumption is minimal.

2. The heat-affected zone of laser cutting is very small, almost no thermal deformation, and no oxidation can produce high-quality, more equivalent parts, which is particularly beneficial to subsequent active production .

3. High cutting obedience, capable of mass production. All operations of the fiber laser cutting machine can be unified into a unified unit as a successive operation process, which greatly reduces the logistics time. The standard tube length is 6 meters. The ancient processing method requires the heaviest clamping, and laser processing can easily complete the clamping and positioning of several meters of pipe, which makes batch processing possible.

4. Fiber laser cutting machine adopts digital system control, which is also one of the advantages of laser cutting machine cutting pipes. The laser tube cutting processing technology can process any style that has been well processed, and can complete the cutting in any direction. The style of the template can be changed quickly without any sponsorship from the object. In this way, we can provide feedback based on customer needs more quickly, and provide an idea for the completion of personalized customization.