How to detect the air tightness of fiber laser cutting machine2

The fiber laser cutting machine is assembled with air tightness active inspection. The frame and the pipe are equipped with symmetrically diffused invariable plates on both sides of the bottom of the frame. The pipe is arranged between the two invariable plates. The side apart from the pipe is equipped with a blocking mechanism, the side of the non-changing plate facing the pipe is equipped with a clamping mechanism, the bottom end of the pipe is equipped with a feeding mechanism, the lower end of the feeding mechanism is equipped with a lifting mechanism, and the non-changing plate faces one end of the pipe. A promotion mechanism is installed on the side wall to complete the automated feeding of the pipes, and the feeding is stable, and the air tightness test of the pipes is carried out before the laser cutting process, which guarantees the product quality, the layout plan is simple and reasonable, and the production difficulty is small. Low cost, suitable for promotion and application.

The tube material bracket mechanism of the fiber laser cutting machine, the base, the reducing wheel, the placement seat and the adjustment pin, the base side is unchanged with a dual-axis cylinder, dual-axis The bottom plate is unchanged on the cylinder, the side plates are not changed on both sides of the bottom plate, the upper ends of the side plates are both provided with grooves, the grooves are not equipped with bearings, and the side plate on one side is not changed. Briquetting. Favorable result: It is possible to use the reducing wheel to support the pipe material to prevent the pipe from bending and deforming under the influence of its own weight. Under the environment where the height of the reducing wheel rises unchanged, the reducing wheel can be rolled to support the arc of the pipe material. The height of the center of the tube will not change, only the radius of the arc, so it can continuously ensure that the pipe is connected to the front and rear chucks on the main bed in the pipe cutting machine, so that the pipe material will not be shaken when the pipe is cut. It can guarantee the quality and compliance of the pipe cutting.

Tube feeding skills of fiber laser cutting machine, fiber laser cutting machine tube feeding machine, tube feeding machine base, feeding component, ejecting component, buffer component, pusher Feeding component, stopper component and feeder plate; pusher component and feeder plate are provided on one side of the base, and feeder component, ejector component and buffer component are provided on the other side of the base. Obtained favorable results: the joint application of feeding assembly, ejector assembly, buffer assembly, pusher assembly, stopper assembly and feeding plate completes the feeding of the pipe, and the pipe slips from the top of the feeding plate after a certain interval and is blocked by the buffer assembly , The buffer assembly absorbs the kinetic energy of sliding down the interval, and the pipe slides from zero kinetic energy to the stopper assembly on the slope of the feeding plate. The extreme ground reduces the kinetic energy of the pipe slipping onto the stopper assembly, and the kinetic energy of the pipe and the pipe feeding machine is spared. The very big impact of the collision guarantees the normal part-time job of the pipe feeder and extends the application life of the pipe feeder.

/