How to clamp and control the fiber laser cutting machine
Fiber laser cutting machine and its tube clamping skills, the electric chuck is placed on the bed; the chuck body and the chuck torsion drive assembly are placed on the base; the shaft is a hollow cylindrical layout with two teeth open, the shaft body One end of the upper part is equipped with a torsion gear that is continuously assembled with the chuck torsion drive. The synchronization disc is placed on the end of the shaft away from the torsion gear; the placement plate is placed on the outside of the synchronization disc, and the clamping jaws can be movably placed on the placement plate; the chuck is driven The chuck drive assembly and the clamping jaw continue, and the chuck drive assembly undergoes the movement of the clamping jaw mobilized by the chuck transmission assembly. Mastering skills of pipe clamping, obtaining relevant information about gripper jaws and motor retarder, and mastering the part-time status of motor retarder, it is possible to complete the stepless torsion of the electric chuck and the simultaneous holding of pipe clamping, which can be spared because of the complicated equipment layout Causes the problem of large positioning deviation of the electric chuck and low positioning accuracy.
The tube blanking assembly of fiber laser cutting machine. The plan pipe supports assembly and undertakes transportation components. The pipe supports the assembly and placement of brackets, degree support components and anti-swing components. The degree support components support the bottom plate and the support field. The placement bracket is equipped with a landing drive component, and the support field and the support bottom plate are hinged. The support base plate is equipped with a flip driving component, two splints of the anti-swing component, and a degree driving component. The carrying component is arranged under the support area and located on the side of the support area farther from the mounting bracket. The landing driving component drives the support component up and down, so that The support field supports pipes. The degree-driven component drives the two splints to clamp the pipes, which reduces pipe swings and improves the accuracy of pipe processing. The turning drive component drives the support field to turn, and the processed pipes are blanked to the receiving and transporting components for transmission. Facilitate blanking and transmission.
The tube storage material warehouse used for the fiber laser cutting machine, the main body of the material warehouse, the access tray set on the side of the material library main body, the storage tray set on the side of the access tray The material truck and the storage frame arranged on the material truck; the unchanging frame for accessing the material tray, the telescopic plate, the vertical lifting part arranged on the unchanging frame, and the moving part to drive the telescopic plate to move; the telescopic plate is provided with and storing The material frame has a continuous clamping part; there is a docking part between the material cart and the access tray, the docking part keeps the material cart and the access tray unchanged, and the clamping part continues the storage frame and the access tray for access The material tray mobilizes the storage frame to move. It can complete the active and regular placement of pipes in the fiber laser cutting machine workshop, improving the space utilization rate of the workshop and the manufacturing compliance of the pipe cutting.
/