How to bundle and divide the fiber laser cutting machine
It is used for the bundle distribution assembly of fiber laser cutting machine, which can complete the rapid distribution of bundles. It is used for the bundle material distribution assembly of fiber laser cutting machine, frame, landing gear and drive assembly. The landing gear and frame slide vertically and continuously. The drive assembly is configured on the frame, and the landing gear is continuous. The bottom of the landing gear is provided Multiple skewed bottom beams arranged in parallel, the frame is provided with guardrails, the guardrail is located on the lower side of the landing gear, and the top of the guardrail is equipped with a skewed guide assembly. The bundle material is arranged between the slanted bottom beam and the guardrail. As the landing gear is promoted, the bundle material gradually rises. When it is higher than the height of the guardrail, the surface pipe can slide out.
The tube clamping assembly of the fiber laser cutting machine, the upper splint and the lower splint, the upper splint is provided with a swing rod, a swing rod bracket, a rolling shaft and a sensor, and the swing rod and The rolling shaft is continuous, the upper splint is opened with a U-shaped through hole, the U-shaped through hole is connected to the high and low appearance of the upper splint, the pendulum rod passes through the U-shaped through hole, the sensor is placed on the upper surface of the upper splint, and the rolling shaft is arranged on the pendulum. On the rod support, the rolling shaft swing rod support and the upper splint remain unchanged. The tube clamping assembly of the fiber laser cutting machine made in the technical plan is equipped with a pendulum continuous plate and a sensor, which can confirm that there is a tube between the upper splint and the lower splint and the tube has been clamped. Its layout is simple, compact, and reliable. .
The tube support mechanism of fiber laser cutting machine. The plan is to install the bottom plate, the jacking component, the second jacking component and the supporting concave wheel. The worm gear assembly of the jacking component is used to climb the top plate, and the second jacking component lifts the cylinder to reach the second top plate. There is a concave wheel placement plate, which supports the rolling arrangement of the concave wheel on the concave wheel placement plate. The fixed part and the telescopic part of the cylinder are lifted. The telescopic part is arranged in the direction of the bottom plate and the telescopic part and the top plate remain unchanged. The two top plates are constant and continuous. The concave wheel placement plate is provided with a placement groove. The upper end of the invariant part passes through the placement groove and connects with the supporting concave wheel. It is inserted so as to make use of the space of the second top plate for placement, shrink the planned length of the second top plate, reduce the overall space occupied by the pipe support mechanism, and make the layout more compact.
/