How to absorb slag in fiber laser cutting machine

Slag suction assembly of fiber laser cutting machine. Two constant support frames, the lower ends of the two constant support frames continue to have two mutually parallel reinforcing ribs, the lower ends of the two reinforcing ribs continue to have a rodless cylinder perpendicular to them, and the slag suction pipe continues below the rodless cylinder The seat can be changed, the slag suction pipe remains unchanged. The slag suction pipe can be destroyed continuously. The front end of the slag suction pipe can be destroyed and the slag suction head can be destroyed. The air duct can be destroyed and the continuous exhaust fan can be destroyed, and the continuous air duct can be destroyed by the exhaust fan. It can improve the cutting quality, guard the part-time situation of the operator, and ensure the health of the operator.

Fiber laser cutting machine console support mechanism, performance screen assembly, console unchanging frame and console arm; console arm includes vertical support and degree The support part, the vertical support part and the degree support part remain unchanged; the console arm can be twisted upwards than the console frame is not changed; the performance screen assembly The performance screen torsion component is rolled and placed on the degree support part; The stage rotating arm can provide strong support for the performance screen assembly, and the performance screen assembly can manipulate the stage rotating arm and the performance screen torsion assembly to free up the naive change of angle and position.

Composite fiber laser cutting machine, tube cutting bed, front chuck, rear chuck, laser cutting head assembly, laser cutting head placement seat and control system, front chuck Disposed on the tube cutting bed, the rear chuck and the tube cutting bed slide continuously, and the rear chuck can move along the length of the tube cutting bed; the composite fiber laser cutting machine also includes a drilling and tapping integrated machine, which is integrated with drilling and attack The machine passes through the two comparatively configured laser cutting head installation side plates and remains unchanged with the laser cutting head installation seat. The drilling and tapping integrated machine is configured to face the pipe being cut; the drilling and tapping integrated machine is used to drill the pipe to be cut And tapping; the laser cutting head is equipped with a drilling and tapping integrated machine, so the composite fiber laser cutting machine mentioned in this request can not only cut pipes, but also drill and tap the cut pipes.

/