How the fiber laser cutting machine can be used for both plate and tube
The plate and tube dual-purpose fiber laser cutting machine, a pair of supporting tables for the plate cutting table, the inner side of one supporting table is equipped with a table driving assembly, and the table driving is equipped with a servo motor. Among them, there is a reduction between the servo motor and the supporting table. Vibration mechanism, a pair of driving components of the damping mechanism, a pair of driving components are arranged between the servo motor and the buffer cavity of the support table. The supplied plate and tube dual-purpose fiber laser cutting machine adopts the layout, so that the pipe or plate can be effectively clamped, which is conducive to the subsequent processing of the pipe or plate.
Fiber laser cutting machine dust removal and smoke exhaust assembly, rack and waste network assembly, where the waste network is equipped with a pair of waste guide components, one side of the waste guide component Connected to the frame, the waste guide assembly includes a base, a material guide plate slack punch mechanism, one side of the base is connected to the frame; the material guide plate is arranged on the top of the base, and the material guide plate and the base slide together; the buffer mechanism is arranged in Between the guide plate and the base, the buffer mechanism of the guide plate is connected with the base. The dust removal and smoke exhaust assembly of the fiber laser cutting machine is equipped with waste guide components, so it can reduce the rate of waste landing and reduce the noise caused by waste falling.
Fully shielded plate and tube dual-purpose fiber laser cutting machine, there are geometric support mechanisms at the bottom of the operating area, the support mechanism supports column one, and the support column one is provided with a cavity. There is a motor in the cavity, and the output end of the motor is continuous with the rolling shaft. The outer side of the rolling shaft is sleeved with two supporting columns, the outer side of the supporting column two is sleeved with a limit ring, and one side of the limit ring is engaged with gears and gears. There is an intermediate shaft running through the middle part of the supporting column, and one end of the supporting column is separated from the rolling shaft. One end runs through the cavity and extends to the supporting column 1 to continue with the control field. There is a support frame on the control field. The top of the support frame is equipped with hydraulic cylinders. The output end of the hydraulic rod remains unchanged. Favorable results: the completion of the clamping of the protective plate tube remains unchanged, the operation is simple, and the part-time compliance is improved.
/