How does the fiber laser cutting machine receive materials along with it

Follow-up rewinding assembly of fiber laser cutting machine, the base is equipped with two sets of interpenetrating arms, the base is hinged with a support cylinder that continues with the interpenetration arm and is used to support the rise of the interpenetration arm, and the interpenetration arm is continuously supported by a flap The flap support frame is equipped with multiple large flip cylinders. The top of the flap support frame is equipped with a large flip plate that continues with the large flip cylinder. The base is equipped with a cylinder support assembly that supports the penetrating arm. One end of the large flap The button has a small flap continuously, and a small turning cylinder with one end continuous with the small flap is continuously rolling under the large flap, and the base is equipped with a servo drive assembly for squeezing the penetrating arm. It has the advantages of reasonable layout, safe and reliable results, and is suitable for a high level of initiative.

The fiber laser cutting machine is automatically assembled with high and low materials, and the side wall of one end of the placement block does not change in sequence. There is a conveyor belt and a fiber laser cutting machine, and one side of the fiber laser cutting machine The side wall is equipped with adjustment assembly. One end of the adjustment assembly is inserted into the placement block and continues to slide with its inner wall, and one side wall of the placement block does not change and there is a constant block, and one side wall of the constant block does not change and has a positioning One side wall of the positioning block remains unchanged and continues with a second conveyor belt, and one side wall of the positioning block is configured with a buffer assembly. The adjustment and assembly are adopted to facilitate the adjustment and control of the angle between the rods, to achieve the control of the material input and conform to the specifications of the material, so as to avoid excessive material input from affecting the manufacturing of fiber laser cutting machines, improve the compatibility of equipment, adopt buffer assembly, and complete useful reduction The material is subjected to force, so as to avoid the excessive force of the material in the processing process, which will affect the product rate.

The help of the fiber laser cutting machine supports the assembly, the installation board, the two rollers of the comparison configuration, the landing gear that drives the two rollers to move up and down, the adjustment mechanism for negotiating and adjusting the distance between the two rollers , The placement plate is fixed on the machine tool of the fiber laser cutting machine, the lifting mechanism is installed on the placement plate, the adjusting mechanism is located on the lifting mechanism, the adjusting mechanism can be moved up and down on the lifting mechanism, and the two rollers are set on the adjusting mechanism. The joint venture of rollers, placement plates, and landing gear negotiation and adjustment agencies can support large-diameter and heavy-duty pipes, so that the laser tube cutting function can simply cut and process large-diameter heavy-duty pipes, and expand the suitable limitations of fiber laser cutting machines; the landing mechanism can adjust the landing plate The height can adapt to pipes of different sizes, which improves the suitability of the fiber laser cutting machine; the configuration of the adjustment mechanism can adjust the interval between the two rollers to adapt to the pipes of different sizes, which improves the suitability of the fiber laser cutting machine.

/