Fully automatic fiber laser cutting machine single table

A single-table full-automatic fiber laser cutting machine, comprising a supporting table, one side of the supporting table is provided with a guiding beam, and the upper end of the supporting table is provided with a slidable stage, the supporting table The two ends of the baffle are provided with baffles, one end of the wide guide beam of the baffle is provided with a limit block, the two ends of the loading platform close to the guide beam are provided with sliding blocks, and the guide beam is provided with a transverse sliding block. The upper end of the transverse sliding block is continuously provided with a rollable torsion platform, the torsion platform is provided with a supporting prism, the supporting prism is provided with a guide longitudinal beam, the guide longitudinal beam is provided with a guide groove, and the guide longitudinal The beam is provided with a longitudinal moving motor continuously cooperating with the guide groove, the longitudinal moving motor is provided with a cutting head, and one end of the supporting table is provided with a grasping area. This is a single-table full-automatic fiber laser cutting machine suitable for the new publicity, with fast processing speed and high precision, and it can cut and process complicated graphics.

A beam layout of a high-speed automatic fiber laser cutting machine, including a beam main body, the beam main body includes an upper plate, a bottom plate, a front plate, a rear plate, a left plate and The right plate, the upper plate, the bottom plate, the front plate, the rear plate, the left plate and the right plate are welded; the inside of the beam main body is arranged in an upward direction and successively arranged with a truss layout. The truss layout includes an inner rib plate and a second inner plate. The rib and the third inner rib, the inner rib is skewed, the upper end of the inner rib is welded to the upper plate, the lower end of the inner rib is welded to the bottom plate, and the rear end of the inner rib is connected to the rear Plate welding, the front end of the inner rib plate is welded to the front plate; the third inner rib plate is arranged vertically, the upper end of the third inner rib plate is welded to the upper plate, and the lower end of the third inner rib plate is welded to the upper plate The bottom plate is welded, the rear end of the third inner rib is welded to the rear plate, and the front end of the third inner rib is welded to the front plate; the second inner rib is along the third inner rib and the inner rib Symmetrical configuration.

This article was published by the original