Fully automatic fiber laser cutting machine improves the standard tabletop of the beam structure
A standard tabletop full-automatic fiber laser cutting machine with improved beam structure, including base and bed, and also includes drag chains, supporting saw teeth, beam structure, cutting head assembly and feeding balls. The front and rear of the bed are unilaterally set There are feeding balls and drag chains. The drag chains are connected to the supporting saw teeth. The beam structure is built across the middle of the bed. The beam structure is equipped with slide rails. The bottom slider of the cutting head assembly is slidably connected to the slide rail. In the new model, an improved beam structure is adopted, and circular threading holes are built to facilitate the discharge of various incoming and outgoing wires, making wiring easier and convenient for security and management.
A highly efficient and safe plate-tube integrated full-automatic fiber laser cutting machine, including a machine tool, a cutting table, a beam structure is built transversely above the cutting table, and a beam structure is built There is a laser cutting head, one side of the machine tool is built with a welded steel pipe frame, one end of the welded steel pipe frame is built with an intersecting line drive system, and the other end is built with a chuck set as the front chuck, and the cutting steel pipe is prevented from being in the welded steel pipe frame Above, the middle position of the welded steel pipe frame is equipped with an adjustable variable diameter tug, and there is a movable clear drag chain around the welded steel pipe frame, and also includes a laser production box. The laser production box is equipped with a laser generator and electronic control. The laser generator is connected to the laser cutting head, and it also includes a console. The console includes a broadcasting device, a driving device and a control system. The control system adopts a PLC control system.
A full-automatic fiber laser cutting machine cutting head, including a body, the lower surface of the body is fixedly connected with a connecting seat with a screw rod, one end of the screw rod is fixedly connected with a taper, and the screw rod is located A sleeve is sleeved on the outside of the inside of the body, a conditioning hole is opened at the top of the sleeve, a gasket is sleeved between the screw and the connecting seat, the lower surface of the connecting seat is fixedly connected with a connector, and the lower surface of the connecting head is fixedly connected There is a connecting plate, and the lower surface of the connecting plate is fixedly connected with a fixing seat. The cutting head of the automatic fiber laser cutting machine has historically built a guard cover. The guard cover is used to guard the cutting head of the automatic fiber laser cutting machine, which prevents the waste from splashing when the cutting head of the automatic fiber laser cutting machine is working. The damage to the cutting head of the automatic fiber laser cutting machine greatly improves the software life of the cutting head of the automatic fiber laser cutting machine, guarantees the suitability of the cutting head, and lowers the cutting head of the automatic fiber laser cutting machine. Production costs.
This article was published by the original