Fully automatic fiber cutting machine has good energy utilization effect

Taiwan group automatic fiber cutting machine data show that in 2017, the sales revenue of my country's welding and cutting equipment industry reached 46.596 billion yuan, and it is expected to be around 47.351 billion yuan in 2018. Taiqun Automatic Optical Fiber Cutter Project Site Selection and Land Scale Control Index Taiqun Automatic Optical Fiber Cutter Project Construction Site Selection The project site is located in the xxx industrial demonstration zone, with superior geographical location and convenient transportation, planning for electricity, water supply and drainage, communications, etc. The public facilities are complete and the construction conditions are good. The nature and scale of the land used for the project of Taiwan-group automatic fiber cutting machine The total land area of u200bu200bthe project is 10485.24 square meters (equivalent to 15.72 acres), and the comprehensive land utilization rate is 100.00%; the project construction follows the principle of 'reasonable and intensive land useThe production specifications and requirements of the optical fiber cutting machine industry should be scientifically designed and reasonably arranged, which meets the planning and construction requirements. Land use control indicators and the net land area of u200bu200bcivil engineering projects is 10485.24 square meters, the building base covers an area of u200bu200b6686.78 square meters, and the total construction area is 16671.53 square meters, of which: the main project of planning and construction is 11696.03 square meters, and the planned green area of u200bu200bthe project is 1156.82 square meters. 3. Energy supply 1. The annual electricity consumption of the project is 923,829.56 kilowatt-hours, equivalent to 113.54 tons of standard coal, which meets the electricity needs of the production, office and public facilities of the Taiwan-group automatic optical fiber cutting machine project. The total annual water consumption of the project is 1,958.12 cubic meters. Equivalent to 0.17 tons of standard coal, it is mainly used for production of make-up water and office and domestic water.

The water for the Taiqun Automatic Fiber Cutter Project is supplied by the municipal pipe network of the xxx Industrial Demonstration Zone. 3. The annual electricity consumption of the Taiwan Group Automatic Optical Fiber Cutting Machine Project is 923829.56 kWh, the annual total water consumption is 1958.12 cubic meters, and the total annual energy consumption (value) of the project is 113.71 tons of standard coal per year. The annual comprehensive energy saving reached 33.97 tons of standard coal per year, the total energy saving rate of the project was 23.76%, and the energy utilization effect was good. Environmental protection and production safety The environmental protection and clean production projects are in line with the development plan of the xxx industrial demonstration zone, in line with the industrial structure adjustment plan and the industrial development policy of the xxx industrial demonstration zone; practical and feasible treatment measures have been taken for all types of pollutants generated, Strictly control within the prescribed emission standards, and the project construction will not have a significant impact on the regional ecological environment. Clean production technology is adopted in the project design, clean raw materials are used to produce clean products, and perfect and effective clean production measures are taken at the same time, which can effectively eliminate and reduce pollution. After the project is completed and put into production, all environmental indicators are in line with local clean production standards. Safe production. The automatic fiber cutting machine project of the engineering platform group of this phase adopts advanced, mature and reliable high-quality environmental protection veneer production technology, strictly implements the relevant labor safety and health policies in the design, and adopts perfect safety and health measures according to the actual situation. After the completion of the project, the automatic optical fiber cutting machine project of the project group will effectively prevent the occurrence of accidents such as fire, lightning, static electricity, electric shock, mechanical damage, and noise hazards. The fire hazard category of the main project of the station group automatic optical fiber cutting machine project in this phase is Class C, and the building fire resistance level is second; in the design of the station group automatic optical fiber cutting machine project, in addition to the design of fire protection measures in strict accordance with the relevant specifications, Various fire-fighting facilities have also been set up in accordance with the requirements of the regulations, mainly including the fire-fighting water supply network and cutting laser equipment exhibition. It is held in the Yiwu International Expo Center in April each year. With its specialization and international features, it has won many exhibitors’ approval. Praise and favor. It has become the most large-scale, more influential and most effective exhibition in the laser engraving industry.

/