Fiber laser cutting machine wood solid burned objects are used again

The cutting machine equipment technology platform, in detail, is the electrical automatic fiber laser cutting machine equipment, including the console, the long rod and the outer frame. There are three long rods in the console, and the long rods are distributed in parallel, and the control An outer frame is hinged on the rear side of the top of the table. At least six spacers are arranged in series among the three long rods, and the spacers are arranged in parallel. Two inner plates are welded between the three long rods, and the inner plate is The position is lower than the spacer. This kind of electrical automatic fiber laser cutting machine equipment. When arranging materials, the user can arrange the materials in the inner plate, and the spacer is longitudinal to separate the long rods with a length of at least 15cm Partition, the user can arrange the materials on the inner plate between the partitions, avoiding the accumulation of materials and the inability to perform ordinary cutting part-time jobs, and during the cutting process, due to the material residue splashed by the cutting head KYL650N100-22110 It can fall on the inner board when it is dropped.

The solid wood burnt objects are then used in a fiber laser cutting machine, which includes the main body of the cutting machine and the clearing mechanism and acquisition mechanism inside the main body of the cutting machine. The clearing mechanism includes a processing panel, and The top surface of the processing panel is provided with a scraper, and the outer side of the scraper and the processing panel is provided with a shell. The two ends of the scraper continue to have limit posts, and the inner wall of the shell is provided with a limit slot. The board goes through the limit column and the limit slot sliding continuously; the scraper used in the new plan can clear the wood chips on the processing panel during processing, so that the appearance of the processing panel is kept clean, ensuring the accuracy of processing, and improving Part-time quality. At the same time, when the scraper needs to be changed, the scraper can be destroyed and replaced by the limit post of the destruction plan, and the planned acquisition tank can purchase the liquidated wood chips, and the planed baffle will purchase The trough is pulled out for liquidation, which is very quick and convenient.