Fiber laser cutting machine ultra-high power and high protection bed
Ultra-high-power and high-protection automatic fiber laser cutting machine tool body, which includes a main supporting beam main body arranged in parallel, a geometric high-temperature resistant stainless steel partition arranged between two main supporting main beams, and a The bottom of the stainless steel partition and the geometric bottom support plate that forms the box layout, and the suction channels arranged along the main supporting beam body and located on the inner appearance of the two supporting main beam main bodies, the suction channels are in the bed The front part converges to a suction interface connected with the suction assembly. It is found that the machine bed with a hollow layout is spared from affecting the accuracy of the machine tool due to the deformation of the cutting area, while at the same time ensuring that the bed has a higher strength and rigidity.
Automatic fiber laser cutting machine double interchangeable part-time table, including the main bed and auxiliary bed body, translation part-time table and lifting part-time table, the bed body is set up There are part-time table guides; the said translation part-time table and landing part-time table are arranged on the part-time table guide rails, and are driven by the chain transmission mechanism to complete the position exchange between the main bed and the auxiliary bed. This technology does not need to be equipped with a landing mechanism, only a reasonable plan for the operation of the part-time station and the newly added support wheel can complete the exchange between the two part-time stations, greatly increase the consolidation of the double-exchange part-time station, reduce mechanical obstacles, and have Convenient operation and simple protection of automatic fiber laser cutting machine double interchangeable part-time table
Adjustable automatic fiber laser cutting machine with support assembly, including cutting table, support leg, adsorption block, storage box, adjustable cutting seat layout, rollable measuring ruler rod The layout can be moved by the network without changing the box layout, fixed board, automatic fiber laser cutting machine, directional wheel, universal wheel, push rod, telescopic board, support seat and square head bolts. The upper end of the support leg is divided and welded to The four corners of the lower end of the cutting table are located. This is suitable for the configuration of the new continuous seat, adjustment rod, support tube and wing bolt, which is beneficial to adjust the height of the continuous seat, facilitates the adjustment of the height of the automatic fiber laser cutting machine and increases the adjustment efficiency; network box, the second wing bolt , The configuration of the cutting table and the non-changing board is beneficial to the waste during network cutting and prevents the waste during cutting from contaminating the part-time situation; the configuration of the continuous tube, the measuring rod and the scale line is beneficial to measuring the cutting length of the material and facilitating the cutting part-time job .