Fiber laser cutting machine manufacturers use industrial robots
The defect of this system of fiber laser cutting machine manufacturers is that it can only process metal workpieces, not non-metallic workpieces. This is because this system uses a fiber laser with a wavelength of 1064NM. Compared with the CO2 laser with a wavelength of 10640NM, it is not easily absorbed by non-metallic workpieces. In short, a combination of industrial robots and fiber lasers is used for processing and trimming. The punching and other processes are completed at one time, and the cut is neat and does not require subsequent processing, which greatly shortens the process flow, reduces labor costs and mold costs, and also improves product quality and product added value. Optional high-speed wire programming software of our company, direct generation of cutting trajectory through digital and analog, abandoning complicated manual teaching, and more suitable for small batch and multi-batch maintenance market, new product trial production and non-standard customization and other personalized cutting needs . Moreover, investing in highly flexible and efficient laser cutting equipment to replace expensive stamping equipment and cutting equipment can make it more flexible to replace products and grasp the market. Use industrial robots instead of five-axis machine tools.
The repeat positioning accuracy of industrial robots of fiber laser cutting machine manufacturers is slightly lower than that of five-axis machine tools, about ±100uM, but it fully meets the accuracy of the automotive sheet metal panel and chassis parts industry Claim. The use of industrial robots greatly reduces the cost of the system, reduces the cost of the power-consuming system, the cost of system operation and maintenance, and the footprint of the system. The product combines the industry characteristics of automobile golden cover parts and chassis parts, and uses a combination of industrial robots + fiber lasers for three-dimensional cutting, and the total cost of consumables is controlled within 20 yuan per hour. Use fiber lasers instead of CO2 lasers. Fiber laser technology is a laser technology that has developed rapidly in recent years. Compared with traditional lasers, it has better cutting quality, lower system cost, longer service life and lower maintenance costs. Lower power consumption. The laser light of the fiber laser can be transmitted through the fiber, which is convenient to connect with the industrial machine and realize flexible processing. The index parameter is caused by the index parameter. The system power consumption is 8KW. The blowing cost is 6 yuan/hour (taking the use of pure oxygen phenanthrene to help cutting carbon steel in 2MM as an example). 200W/300W/400W/500W/1000W cutting speed 0-15/min (adjustable according to power and workpiece material and thickness) laser wavelength 1064NM working area 5M 1.6~3m hemispherical working area + mobile worktable 2M) The focal length of the cutting head is 57 inches (optional according to the thickness of the workpiece). Repeated positioning accuracy ±0.1MM power supply three-phase AC 380V electric power 8KW cooling method air cooling/water cooling (depending on the power of the optional laser) Manipulator protection grade IP65 system service life 100,000 hours system warranty for 2 years. Features of the 3D fiber laser cutting robot 1 High mulberry quality is especially suitable for small batch 3D sheet metal cutting.
This article is published by the original