Fiber laser cutting machine high power

High-power automatic fiber laser cutting machine, including control table, part-time table, cable, invariable bracket, laser emission assembly and laser cutting head; the control table and part-time table experience cable continuity; the part-time table There is a base at the bottom, and two longitudinal moving slide rails are divided on both sides. The two ends of the invariable support experience the continuous longitudinal moving slide rail and the part-time table; the upper end of the invariable support is provided with a horizontal moving slide rail. The laser emission assembly has undergone the horizontal movement of the sliding rail and the constant support; the laser cutting head remains unchanged directly below the laser emission assembly; this discovery has undergone optimization of the semiconductor laser's appearance layout and changing the relationship between the laser emission assembly and the laser cutting head. Position, reduce the consumption of the laser in both generation and transmission, thereby improving the overall optical conversion compliance of the automatic fiber laser cutting machine, reducing the heat generation from the source, and the high-power automatic fiber laser cutting machine has a lower fever, The optical conversion obedience is high.

Automatic fiber laser cutting machine for film sticking: includes a body, on which a part-time table and a beam are arranged, and a laser cutting head is arranged on the beam, and the laser The cutting head can rise and fall along the Z axis, and can move along the cross beam in the Y axis deflection direction. The cross beam is arranged above the part-time table and can move along the X axis deflection direction. The part-time table includes a frame, and the frame is arranged parallel and symmetrically There is a geometric support plate, the support plate is provided with geometric support points, and all the support points are coplanar, resulting in a support plane for the workpiece. The support plane of this new-style part-time table is composed of multiple evacuated and coplanar support points. Compared with the ancient plate and net plate support planes, the support points are smaller, the distance between the support points is smaller, the deformation of the material board is small, and the cutting The later waste can be scattered quickly, so it can ensure better engraving accuracy, and the workpiece will not stick to the part-time table, which is particularly compliant with the engraving of the hydraulic film.