Fiber laser cutting machine has smooth transmission function

A fiber laser cutting machine with smooth transmission function, including a frame, a movable frame, a movable seat and a cutting head. The frame is provided with a groove, and the groove is provided with two movable blocks and a first Two servo motors, and the moving block does not remain on the moving frame, there are two ball screw rods continuously rolling on the groove, and a chain transmission layout is arranged between the two. The advantage is: this is suitable for the joint application of the new experience servo motor, ball screw and ball nut, replacing the ancient rack and pinion transmission, making the moving position more accurate; the configuration of the fuel tank and the oil outlet pipe facilitates the smoothing of the ball screw, and the ball screw The rolling of the rod mobilizes the ball nut to move and smooth the continuity between the ball screw and the ball nut. The oil outlet pipe is arranged directly above the ball screw, and no signs of smooth oil dripping everywhere are found.

The cutting machine equipment technology platform, in detail, is an electrical automatic fiber laser cutting machine equipment, including a console, a long rod and an outer frame. There are three long clips in the console. Rods, and the long rods are distributed in parallel. The rear side of the top of the console is hinged with an outer frame. At least six spacers are arranged in a series of the three long rods, and the spacers are arranged in parallel between the three long rods. Two inner plates are welded, and the position of the inner plate is lower than the spacer. This kind of electrical automatic fiber laser cutting machine equipment, the user can arrange the materials in the inner plate, and the spacer is longitudinal The partition of the long rod is divided into a partition with a length of at least 15cm. The user can arrange the materials on the inner plate between the partitions, so as to avoid the accumulation of the materials and the inability to perform normal cutting part-time jobs. The material residue splashed by the head KYL650N100-22110 can fall on the inner plate when it is dropped.