Fiber laser cutting machine for paper finished product processing

Fiber laser cutting machine for paper finished product processing, including a box body, a grasper, a support seat, and a moving wheel. The lower end of the box body is provided with the support seat, and one side of the support seat is provided with the moving wheel. The controller is arranged below the inner side of the box, the controller is equipped with a network box on one side, a laser generator is arranged on one side of the network box, a part-time station is arranged above the network box, and a second slider is arranged on the part-time station , A second lead screw is arranged on the second slider, a second servo motor is arranged at the rear end of the second lead screw, a lead screw is arranged above the second slider, and a servo motor is arranged at one end of the lead screw. The slide is arranged on the lead screw. The advantageous result is that this new type of application can complete simple product processing, probably batch-type product processing, with wide processing limitations, high processing obedience, and good quality, greatly freeing high-load manual processing, and reducing manufacturing costs.

The adjustment mechanism of the condenser tube and the camera of the fiber laser cutting machine is tight, including the frame and the bracket. The frame is equipped with a part-time table top and two sides of the part-time table top The rack is equipped with a driving mechanism that is effective for the front and back movement of the driving frame, and a second driving mechanism that is effective for the lateral movement of the driving frame is placed on the driving mechanism. The division of the two ends of the second driving mechanism is consistent with the one driving mechanism. , The bracket is placed on the second drive mechanism, the front end surface of the bracket can be continuously slid with a slider, the condenser tube is installed vertically on the slider, and the front end surface of the bracket is effectively used for the vertical sliding of the drive slider. In the third drive concept, the bracket does not have a mounting seat, the front surface of the mounting seat does not have a mounting plate, and the camera remains on the front surface of the mounting plate; this is suitable for new and ancient condensing tubes. Compared with the mediation agency of camera status, it has the advantages of simple layout and high level of initiative.