Fiber laser cutting machine can use rolling sawtooth
A rolling sawtooth fiber laser cutting machine, including a working table, the top of the working table continues to slide with a sliding seat, and the sliding seat continues to have active baldness, the working table is concave, and the top wall of the working table is concave Side rolling continues to have multiple drive shafts arranged in parallel. The new layout of this application is simple, start the servo motor, under the use of servo motor, sprocket and chain, the transmission shaft mobilizes the transmission gear to roll, the transmission gear meshes with the rack, mobilizes the sawtooth bed board to move, the sawtooth bed board slides to the edge of the working table , Facilitate the loading of processed parts. After loading with processed parts, the servo motor rolls in reverse to mobilize the serrated bed board to move to the processing area to facilitate processing. At the same time, the mutual use between the U-shaped limit rod and the limit wheel limits the serrated bed board Sliding along the axis of the drive shaft, the saw-tooth bed board and the work table were spared.
A fiber laser cutting machine laser, including a base and a supporting column, the upper appearance of the base does not change, there is a constant box, the top appearance of the constant box does not change, there is a constant block, a constant block There is a continuous bearing on one side of the bearing, the inner behavior of the bearing continues to have a screw rod, the rib on the screw rod continues to have a nut block, the end of the screw rod close to the nut block continues to have a second bearing, and the bottom end behavior of the screw rod continues to be adjusted. The knob, the invariable block is separated from the end of the bearing, and there is a third bearing continuously. The laser of the fiber laser cutting machine, through the configuration of laser cutting assembly, the use of laser probes and focusing mirrors, you can continue to view the processed workpieces for cutting, the cutting compliance is high, the task intensity of the staff is reduced, the overall work result is improved, the fan and the focus are configured. The dust collection box guarantees the application results of the laser of the fiber laser cutting machine.