Fiber laser cutting machine and plate tube can be dual use

Plate and tube dual-purpose fiber laser cutting machine, it is important to affect the laser cutting equipment platform. The plate and tube dual-purpose fiber laser cutting machine includes a plate cutting table, a pipe clamping system, a cantilever cutting system, and a laser and control system; the plate cutting table includes a support table, and both sides of the support table are equipped with slideways, A load-bearing table is arranged between the two slides; the pipe clamping system includes a clamping invariant table, the clamping invariant table is located below the supporting table and one end is equipped with a fixture placement position, and the fixture placement position is not configured A variable chuck, the top of the clamping and invariant stage is equipped with a linear drive assembly at one end of the fixture placement position, and a push chuck is arranged on the linear drive assembly; the laser and control system include a laser generator, an external optical path, and a stabilized power supply And master. The beneficial result of this discovery is that it can complete a machine to complete the cutting process of plates and pipes, with more complete equipment efficiency, lower cost, and less space.

An interchangeable working table for fiber laser cutting machine, including working table, second working table, frame, adjustment assembly and drive assembly for working table; said frame It is a rectangular frame, and the inner wall of the frame is equipped with slide grooves that are effective for the movement of the working table and the second working table. The adjustment assembly includes a motor, a screw rod and a guide rod, and the screw rod penetrates both ends of the frame, Two screw rods are divided into sliding joints with one side of the working table and one side of the second working table, the guide rod penetrates the frame, and the two guide rods are divided with the other side of the working table and the second The other side of the working table is sliding and jointed, one end of the screw rod is fixedly connected to the output end of the motor, and the drive assembly is jointed with the threaded rod rib; the advantageous result of the new type of application is that the layout is simple and the working table can be interchanged. At the same time, you can master the movement distance of the interchangeable work table, which can meet the cutting of various sizes of plates, and improve the manufacturing compliance. www.taikanlaser.com