Fiber laser cutting machine and its CCD camera height fine-tuning device

Automatic fiber laser cutting machine and its CCD camera height fine-tuning assembly, which affects the laser processing platform, solves the problem of reducing the original equipment processing and the CCD camera can be placed on the equipment. The main points of the technical plan are to include the L-shaped The installation board, the installation board includes a degree board and a vertical board, the degree board is provided with invariable parts that keep the installation board on the horizontal board of the equipment, and the vertical board is provided with a CCD camera The camera pallet is provided with an embedding slot for the CCD camera to be embedded, and the invariant part is not changed on the horizontal plate of the equipment, so that the CCD camera can be placed on the equipment by reducing the processing of the original equipment. On the benefits.

Automatic fiber laser cutting machine nozzle active flushing assembly, including a console used to place the cutting nozzle and a nozzle with a torsion plate placed at the bottom of the cutting nozzle, the cutting nozzle There is a water pipe inside. One end of the water pipe is connected to the water tank spreading in the console, and the other end is connected to the water cavity embedded on the continuous shaft. The water cavity undergoes the No. 1 torsion and the through hole in the middle of the continuous shaft to continue the No. 1 column. The two ends of the No. 1 torsion shaft are divided through the bottom of the No. 1 column and the top of the sprinkler installation plate to integrate the No. 1 column and the sprinkler installation plate. The sprinkler installation plate is equipped with geometric sprinklers; the continuous shaft is different from No. 1 One side of the torsion continuous axis is arranged with the second torsion continuous axis, the second torsion continuous axis continues to the second column, the second column undergoes the second torsion axis and the rag placement plate is continuously integrated, and the rag is placed on the rag placement plate.

The machine tool protective assembly of the automatic fiber laser cutting machine includes a housing, a motor and an energy bar. The outer part of the housing is provided with a motor, and the energy bar is placed inside the chain, A main gear is arranged at the lower end of the linkage rod, a second slave gear is arranged on the continuous rod, a toggle gear is fixed on the energy rod, a spring rod is arranged at the lower end of the vertical plate, and the part-time bearing is arranged On the third spring rod, the third spring rod is arranged inside the protective cover, and the protective cover is not changed at the lower end of the housing. This automatic fiber laser cutting machine machine tool protection assembly adopts a new layout plan, plans a layout with mobile functions, and solves the problem of mobile protection when the ancient assembly is unfavorable, and plans a layout with protective functions. The ancient assembly is not useful. In addition to the question of protection, a layout with clean efficiency was planned, and the question about the cutting process due to the disadvantages of ancient assembly was handled.