Destructibility of materials in the field of fiber laser cutting machine
The wiring harness processing of fiber laser cutting machine includes its electrical functions, material destructibility, temperature resistance, etc., which are higher than the requirements of ordinary wiring harnesses, and are particularly related to safety: such as biasing the control system and braking the tension of these wiring harnesses. Parts, request more severe wiring harness processing. The standard of wiring harness disposal depends on the crimping rate. The calculation of crimping rate requires extra equipment, as well as the wiring harness one-sided tester developed by the manufacturer. Harness is very useful for trying to pass the crimping of the wiring harness. detector. The purpose of tying the car cable in the vehicle is to transmit or exchange the electric signal or data signal of the electrical system to complete the functions and requirements of the electrical system. It is the main body of the car circuit, and there is no wiring without the wiring harness. The planning process and production process of automotive wiring harnesses are relatively complicated, and the wiring harness engineers are requested to be careful and not careless. If the wiring harness plan is different and the function of each component cannot be combined, the wiring harness may become a more common obstacle to the car.
What are some examples of fiber laser cutting machine?
The pipe cutting machine can have four types according to its application tools: cutter head type, grinding wheel type, hydraulic disc cutter type and saw.
The cutter head type pipe cutting machine is a special machine tool that uses cutting tools to cut steel pipes. According to its working conditions, it is divided into steel pipe torsion, cutter head unchanged, cutter head torsion, and steel pipe torsion. Change two modes.
The credential control method can be divided into full-active pipe cutting machine, semi-active pipe cutting machine and manual pipe cutting machine.
What are the methods for selecting the wiring harness in the field of fiber laser cutting machine?
1: The temperature around the idea is high and corroded There are more natural gases and liquids. Therefore, the wires of the original wiring harness must be used with high temperature resistance, oil resistance, vibration resistance, and collision resistance.
2: The wire on the active transmission is a wire with hydraulic oil resistance, high temperature resistance, and temperature stability.
3: The wires of the wire harness on the luggage compartment cover must be connected to its elasticity at low temperatures, so cold elastic wires should be used to ensure normal operations.
4: In the field of fiber laser cutting machine, weak light signal sensors should use barrier wires, such as knock sensors, crankshaft position sensors, and ABS wheel speed sensors.
5: Stranded wires with high temperature resistance of 150-200℃, hard and wear-resistant outer guard insulation layer, but with a core of more than 133 strands used in ABS wiring harness assembly.
6: The energy line is like an idea to exchange the generator output line and the battery line. The wire used is an extra wire that can withstand high current, the insulation layer has good heat dissipation performance and low voltage.
/