We are confident about the exquisite details of plasma cutting machine.plasma cutting machine has the following advantages: well-chosen materials, reasonable design, stable performance, excellent quality, and affordable price. Such a product is up to the market demand.
Company Advantages 1. Thanks to the design of jewelry laser welding machine , our welding equipment brings much convenience for customers. 2. The product must be checked by our inspection system to ensure the quality meets the industry requirement. 3. Investing in this product will create a valuable resource for large production volumes, which in turn, will increase profitability. 4. Using this product means less human error. It can perform repetitive tasks and is less likely to make mistakes than an employee.
Company Features 1. Jinan Lingxiu Laser Equipment Co.,Ltd. is China's largest welding equipment leader. 2. Different mechanisms are provided for fabricating different laser welding machine . 3. Jinan Lingxiu Laser Equipment Co.,Ltd. would like to bring the greatest value to our customers through our laser welding . Ask! After we have adopted the energy management plan which was rigorously evaluated for its reasonability. Since then, we have improved water efficiency by 20% during production.
Auto follow: the height will follow automatically during the cutting process.Automatic sorting: programming, nesting and nesting of parts to be cut.Automatic compensation: make up for the size difference caused by the cutting seam loss, and automatically perform material compensation to ensure product accuracy.Automatic edge finding: Perceive the inclination angle and origin of the sheet, and cut at the angle and position suitable for the sheet to avoid waste of raw materials.Breakpoint memory: The system records the machine's suspension state when the power is off, and the machine can continue to work on the original basis after restarting.Automatic leapfrog: Parabolic motion is used in the idle stroke to reduce the time of raising the cutting head and improve cutting efficiency, commonly known as "leapfrog".Automatically walk the frame: before the material is cut, confirm the processing range through the software setting, and make sure that the required cutting material does not shift.Automatically add lead: automatically set the lead position to prevent burns at the beginning and end of the workpiece.Co-edge cutting: According to certain rules, the parts with long sides are arranged together as long as possible in a long-side-to-long-side manner. When the cutting command is generated, the common edge part of the outer contour of these parts is cut only once. Save time and save materials.Can read DXF/AI/PLT format files and international standard G codesAutomatic micro link: During the cutting process, the parts and the plate are not separated to ensure that the parts are not deformed and the safety of the laser head during rapid movement.
The auxiliary gas pressure, laser power, cutting speed, focus position and other parameters have a great influence on the cutting effect of the laser cutting machine metal sheet.Auxiliary gas pressureThe role of the auxiliary gas is to blow away the slag, cooling material and combustion-supporting when the cnc laser fiber cutting machine is running. Oxygen, compressed air, nitrogen and inert gases are more common auxiliary gases.Oxygen can participate in metal combustion, which can improve cutting efficiency and is suitable for cutting most metals; inert gas and air are suitable for cutting some metal materials (such as aluminum alloy) and non-metal materials, and can prevent materials from burning.If the auxiliary gas pressure is too high, a vortex will appear on the surface of the material, which will weaken the ability to remove the molten material, resulting in wider slits and rough cutting surfaces; if the pressure is too low, the molten material cannot be completely blown away, and the lower surface of the material will stick. With dregs. Therefore, in order to obtain the best cutting quality, the auxiliary gas pressure should be adjusted when the steel sheet cutting machine laser is running. Laser powerLaser power will affect many aspects of fiber laser machine table cutting, such as cutting speed, slit width, cutting thickness and cutting quality. The power depends on the material characteristics. For example, materials with high melting points (such as alloys) and high reflectivity of the cut surface (such as copper and aluminum) require larger laser power.The laser cutting machine sheet metal has a laser power to obtain the best cutting quality during processing. When the laser power is lower than this laser power, imperviousness or slagging will occur; when it is higher than this power, it will burn excessively. Cutting speedWhen the fiber metal laser cutting fiber machine is running at the ideal cutting speed, the section of the material to be cut is smooth and will not produce burrs, and the cutting surface will show a relatively stable line. When the auxiliary gas pressure and laser power are constant, the cutting speed and the slit width show a non-linear inverse relationship. When the cutting speed of the laser fiber cutting machine is relatively slow, the action time of the laser energy on the slit is prolonged, resulting in cutting If the slit width increases, or the slit underneath is too wide, the cutting quality and production efficiency will be greatly reduced.To speed up the cutting speed of the metal cutting fiber laser machine, the action time of the laser beam energy on the workpiece becomes shorter, so that the heat diffusion and heat conduction effects become smaller, and the width of the slit is correspondingly reduced. However, when the speed of the cnc laser cutting machine metal is too fast, the workpiece material to be cut will be impenetrable due to insufficient cutting heat input. Focus positionThe distance from the laser focus of the cnc laser fiber optic cutting machine steel to the surface of the workpiece is the focus position. The roughness of the cut surface, the slope and width of the slit and the adhesion of the molten residue are directly affected by the focus position. When the focus position is too far forward, the heat absorbed by the lower end of the cut workpiece will increase, which will cause the cut material and the melted material near the slit to flow on the lower surface in a liquid state. After cooling, the melted material will be spherically stained. Attached to the lower surface of the workpiece; if the focus position is behind, the heat absorbed by the lower end surface of the material being cut is reduced, so that the material in the slit cannot be completely melted, and some sharp and short pieces will adhere to the lower surface of the plate Residue. Normally, the focus position should be on the surface of the workpiece or slightly lower, but different material requirements are different. When the cnc fiber laser cutting machine metal cuts carbon steel, the cutting quality is better when the focus is on the surface of the plate; while the metal cutting laser machine is for stainless steel When cutting, the focus should be about 1/2 of the thickness of the sheet for better results.
Thecover fiber laser cutting machine is the mainstream example on the market, and it has the following advantages:Prevent laser damage to human eyesIn the international laser classification, class 3 or 4 lasers are lasers that can be used for cutting. Operators are prohibited from looking directly at them. The power of scattered light should also not be underestimated. When operating a sheet metal fiber laser cutting machine, novices will be accustomed to paying attention to the good monochromaticity of the laser, small chromatic aberration in the fundus, and extremely low laser energy irradiation can cause damage to the cornea or retina, so as to avoid being stared at the laser and causing irreparable damage to your eyes.The closed type fiber laser cutting machine can isolate the laser from the operator to the greatest extent. After adjusting the various parameters and cutting the sample up to the standard, the side sliding door of the fiber metal sheet laser cutting machine can be closed to perform fully enclosed cutting to avoid damage to the human body caused by the laser.Reduce the harm of smoke and dust to peopleThe cutting method of full covered fiber laser cutting machine is thermal cutting, and a large amount of smoke and dust will be generated during the cutting process. Although fiber laser cutting machine with protective cover are generally equipped with dust extraction devices, the escape of smoke and dust is unavoidable, and it will inevitably cause pollution and harm to the working environment. The operator is in good health.The enclosed structure of the enclosed fiber laser cutting machine, the smoke and dust used to escape is very small, or even negligible.Avoid mechanical damageAlthough the fiber laser cutting machine with cover does not use a blade but a laser as a processing tool, the probability of causing mechanical damage has been greatly reduced, but there is still no guarantee that there will be no accidents. The fiber laser cutting machine full enclosed completely isolates the processing structure, processing material, carbonization device, etc. from the operator, minimizing the risk of accidents. The fiber laser cutting machine cover does not even have many advantages. When operating, you must strictly abide by the specifications, such as wearing goggles, dust masks, and gloves.
Metal pipes are often used in aerospace, construction machinery, automobile industry, petrochemical, agricultural and animal husbandry machinery and other industries. It is necessary to process metal pipes into parts of different shapes and sizes to meet the requirements of different working scenarios. The tube laser cutting machine is particularly suitable for processing various metal pipes. High flexibility and high automation are the characteristics of the tube laser cutting system, which can realize the production mode of different materials in small batches and multiple varieties.The following will introduce the key technology of pipe laser cutting machine tube laser cutting system. Light guide focusing systemThe function of the light guide focusing system is to guide the light beam output by the generator of the laser tube cutting machine to the cutting head of the focusing light path. For laser cutting pipes, the focused spot diameter of the focused beam is small and the power is high to obtain high-quality slits. This requires the generator of the metal tube laser cutting machine to output low-order modes. When the laser cutting machine tube cuts the tube, in order to make the beam focus diameter smaller, the order of the transverse mode of the laser should be small, preferably the fundamental mode. The cutting head of the pipe fiber laser cutting machine is equipped with a focusing lens. After the laser beam is focused by the lens, a smaller focusing spot can be obtained, so that high-quality pipe cutting can be carried out. To Trajectory control of cutting headWhen the fiber laser tube cutting machine cuts the pipe, the shape of the pipe is relatively complicated and belongs to the space surface. It will be difficult to program and process with conventional methods. This requires the operator to select the correct processing path and appropriate reference points according to the processing requirements. The numerical control system records the feed situation of each axis and the coordinate value of the reference point, and then uses the spatial straight line and arc interpolation function of the fiber laser cutting machine for steel tube system to record the coordinate value of the processing process and generate the processing program. Automatic control of focus position of tube pipe fiber laser cutting machineAn important factor affecting cutting quality is the focal position of the round pipe laser cutting machine. It is one of the key technologies for laser cutting pipes to make the vertical direction of the focal point relative to the surface of the workpiece unchanged through automatic measurement and control devices. Through the integration of the laser focus position control and the laser processing system linear axis (XYZ), the movement of the cutting head is lighter and more flexible, and the position of the focus point can be fully understood, avoiding the cutting head and cutting pipe or tube during processing. Other objects collide.